lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] add binding for iio adc driver for TI ADS1018
From
Date
This looks good to me with the only mention that I don't actually have 
time to maintain this :(.

Perhaps you can add yourself?

On 11/8/21 8:43 PM, Iain Hunter wrote:
> Add a new binding for new IIO ADS1018 driver.
>
> Signed-off-by: Iain Hunter <drhunter95@gmail.com>
> ---
> .../bindings/iio/adc/ti,ads1018.yaml | 109 ++++++++++++++++++
> 1 file changed, 109 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml
> new file mode 100644
> index 000000000000..ba0fdfba2c45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1018.yaml
> @@ -0,0 +1,109 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/ti,ads1018.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI ADS1018 4 channel SPI analog to digital converter
> +
> +maintainers:
> + - Daniel Baluta <daniel.baluta@nxp.com>
> +
> +description: |
> + Datasheet at: https://www.ti.com/lit/gpn/ads1018
> + Supports both single ended and differential channels.
> +
> +properties:
> + compatible:
> + const: ti,ads1018
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + "#io-channel-cells":
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
> +
> +patternProperties:
> + "^channel@[0-7]+$":
> + type: object
> + description:
> + Child nodes needed for each channel that the platform uses.
> +
> + properties:
> + reg:
> + description: |
> + 0: Voltage over AIN0 and AIN1.
> + 1: Voltage over AIN0 and AIN3.
> + 2: Voltage over AIN1 and AIN3.
> + 3: Voltage over AIN2 and AIN3.
> + 4: Voltage over AIN0 and GND.
> + 5: Voltage over AIN1 and GND.
> + 6: Voltage over AIN2 and GND.
> + 7: Voltage over AIN3 and GND.
> + items:
> + - minimum: 0
> + maximum: 7
> +
> + ti,gain:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 5
> + description: |
> + pga is the programmable gain amplifier (values are full scale)
> + 0: +/- 6.144 V
> + 1: +/- 4.096 V
> + 2: +/- 2.048 V (default)
> + 3: +/- 1.024 V
> + 4: +/- 0.512 V
> + 5: +/- 0.256 V
> +
> + ti,datarate:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 6
> + description: |
> + Data acquisition rate in samples per second
> + 0: 128
> + 1: 250
> + 2: 490
> + 3: 920
> + 4: 1600 (default)
> + 5: 2400
> + 6: 3300
> +
> + required:
> + - reg
> +
> +examples:
> + - |
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@1 {
> + compatible = "ti,ads1018";
> + reg = <0x1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + channel@4 {
> + reg = <4>;
> + ti,gain = <3>;
> + ti,datarate = <5>;
> + };
> + };
> + };
> +...

\
 
 \ /
  Last update: 2021-11-08 19:46    [W:0.044 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site