lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v16] asus-wmi: Add support for custom fan curves
From
Hi,

On 10/24/21 05:37, Luke D. Jones wrote:
> Add support for custom fan curves found on some ASUS ROG laptops.
>
> These laptops have the ability to set a custom curve for the CPU
> and GPU fans via two ACPI methods.
>
> This patch adds two pwm<N> attributes to the hwmon sysfs,
> pwm1 for CPU fan, pwm2 for GPU fan. Both are under the hwmon of the
> name `asus_custom_fan_curve`. There is no safety check of the set
> fan curves - this must be done in userspace.
>
> The fans have settings [1,2,3] under pwm<N>_enable:
> 1. Enable and write settings out
> 2. Disable and use factory fan mode
> 3. Same as 2, additionally restoring default factory curve.
>
> Use of 2 means that the curve the user has set is still stored and
> won't be erased, but the laptop will be using its default auto-fan
> mode. Re-enabling the manual mode then activates the curves again.
>
> Notes:
> - pwm<N>_enable = 0 is an invalid setting.
> - pwm is actually a percentage and is scaled on writing to device.
>
> Signed-off-by: Luke D. Jones <luke@ljones.dev>

Thanks, this latest version looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

I will merge this once 5.16-rc1 is out.

Regards,

Hans

> ---
> drivers/platform/x86/asus-wmi.c | 567 ++++++++++++++++++++-
> include/linux/platform_data/x86/asus-wmi.h | 2 +
> 2 files changed, 564 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index e14fb5fa7324..680570b37c2f 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -106,8 +106,17 @@ module_param(fnlock_default, bool, 0444);
>
> #define WMI_EVENT_MASK 0xFFFF
>
> +#define FAN_CURVE_POINTS 8
> +#define FAN_CURVE_BUF_LEN (FAN_CURVE_POINTS * 2)
> +#define FAN_CURVE_DEV_CPU 0x00
> +#define FAN_CURVE_DEV_GPU 0x01
> +/* Mask to determine if setting temperature or percentage */
> +#define FAN_CURVE_PWM_MASK 0x04
> +
> static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
>
> +static int throttle_thermal_policy_write(struct asus_wmi *);
> +
> static bool ashs_present(void)
> {
> int i = 0;
> @@ -122,7 +131,8 @@ struct bios_args {
> u32 arg0;
> u32 arg1;
> u32 arg2; /* At least TUF Gaming series uses 3 dword input buffer. */
> - u32 arg4;
> + u32 arg3;
> + u32 arg4; /* Some ROG laptops require a full 5 input args */
> u32 arg5;
> } __packed;
>
> @@ -173,6 +183,13 @@ enum fan_type {
> FAN_TYPE_SPEC83, /* starting in Spec 8.3, use CPU_FAN_CTRL */
> };
>
> +struct fan_curve_data {
> + bool enabled;
> + u32 device_id;
> + u8 temps[FAN_CURVE_POINTS];
> + u8 percents[FAN_CURVE_POINTS];
> +};
> +
> struct asus_wmi {
> int dsts_id;
> int spec;
> @@ -220,6 +237,10 @@ struct asus_wmi {
> bool throttle_thermal_policy_available;
> u8 throttle_thermal_policy_mode;
>
> + bool cpu_fan_curve_available;
> + bool gpu_fan_curve_available;
> + struct fan_curve_data custom_fan_curves[2];
> +
> struct platform_profile_handler platform_profile_handler;
> bool platform_profile_support;
>
> @@ -285,6 +306,103 @@ int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, u32 *retval)
> }
> EXPORT_SYMBOL_GPL(asus_wmi_evaluate_method);
>
> +static int asus_wmi_evaluate_method5(u32 method_id,
> + u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4, u32 *retval)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = arg2,
> + .arg3 = arg3,
> + .arg4 = arg4,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u32 tmp = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> + if (obj && obj->type == ACPI_TYPE_INTEGER)
> + tmp = (u32) obj->integer.value;
> +
> + if (retval)
> + *retval = tmp;
> +
> + kfree(obj);
> +
> + if (tmp == ASUS_WMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +/*
> + * Returns as an error if the method output is not a buffer. Typically this
> + * means that the method called is unsupported.
> + */
> +static int asus_wmi_evaluate_method_buf(u32 method_id,
> + u32 arg0, u32 arg1, u8 *ret_buffer, size_t size)
> +{
> + struct bios_args args = {
> + .arg0 = arg0,
> + .arg1 = arg1,
> + .arg2 = 0,
> + };
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + int err = 0;
> +
> + status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID, 0, method_id,
> + &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = (union acpi_object *)output.pointer;
> +
> + switch (obj->type) {
> + case ACPI_TYPE_BUFFER:
> + if (obj->buffer.length > size)
> + err = -ENOSPC;
> + if (obj->buffer.length == 0)
> + err = -ENODATA;
> +
> + memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length);
> + break;
> + case ACPI_TYPE_INTEGER:
> + err = (u32)obj->integer.value;
> +
> + if (err == ASUS_WMI_UNSUPPORTED_METHOD)
> + err = -ENODEV;
> + /*
> + * At least one method returns a 0 with no buffer if no arg
> + * is provided, such as ASUS_WMI_DEVID_CPU_FAN_CURVE
> + */
> + if (err == 0)
> + err = -ENODATA;
> + break;
> + default:
> + err = -ENODATA;
> + break;
> + }
> +
> + kfree(obj);
> +
> + if (err)
> + return err;
> +
> + return 0;
> +}
> +
> static int asus_wmi_evaluate_method_agfn(const struct acpi_buffer args)
> {
> struct acpi_buffer input;
> @@ -1806,6 +1924,13 @@ static ssize_t pwm1_enable_store(struct device *dev,
> }
>
> asus->fan_pwm_mode = state;
> +
> + /* Must set to disabled if mode is toggled */
> + if (asus->cpu_fan_curve_available)
> + asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false;
> + if (asus->gpu_fan_curve_available)
> + asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false;
> +
> return count;
> }
>
> @@ -1953,9 +2078,9 @@ static int fan_boost_mode_check_present(struct asus_wmi *asus)
>
> static int fan_boost_mode_write(struct asus_wmi *asus)
> {
> - int err;
> - u8 value;
> u32 retval;
> + u8 value;
> + int err;
>
> value = asus->fan_boost_mode;
>
> @@ -2013,10 +2138,10 @@ static ssize_t fan_boost_mode_store(struct device *dev,
> struct device_attribute *attr,
> const char *buf, size_t count)
> {
> - int result;
> - u8 new_mode;
> struct asus_wmi *asus = dev_get_drvdata(dev);
> u8 mask = asus->fan_boost_mode_mask;
> + u8 new_mode;
> + int result;
>
> result = kstrtou8(buf, 10, &new_mode);
> if (result < 0) {
> @@ -2043,6 +2168,426 @@ static ssize_t fan_boost_mode_store(struct device *dev,
> // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
> static DEVICE_ATTR_RW(fan_boost_mode);
>
> +/* Custom fan curves **********************************************************/
> +
> +static void fan_curve_copy_from_buf(struct fan_curve_data *data, u8 *buf)
> +{
> + int i;
> +
> + for (i = 0; i < FAN_CURVE_POINTS; i++) {
> + data->temps[i] = buf[i];
> + }
> +
> + for (i = 0; i < FAN_CURVE_POINTS; i++) {
> + data->percents[i] =
> + 255 * buf[i + FAN_CURVE_POINTS] / 100;
> + }
> +}
> +
> +static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
> +{
> + struct fan_curve_data *curves;
> + u8 buf[FAN_CURVE_BUF_LEN];
> + int fan_idx = 0;
> + u8 mode = 0;
> + int err;
> +
> + if (asus->throttle_thermal_policy_available)
> + mode = asus->throttle_thermal_policy_mode;
> + /* DEVID_<C/G>PU_FAN_CURVE is switched for OVERBOOST vs SILENT */
> + if (mode == 2)
> + mode = 1;
> + else if (mode == 1)
> + mode = 2;
> +
> + if (fan_dev == ASUS_WMI_DEVID_GPU_FAN_CURVE)
> + fan_idx = FAN_CURVE_DEV_GPU;
> +
> + curves = &asus->custom_fan_curves[fan_idx];
> + err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
> + FAN_CURVE_BUF_LEN);
> + if (err)
> + return err;
> +
> + fan_curve_copy_from_buf(curves, buf);
> + curves->device_id = fan_dev;
> +
> + return 0;
> +}
> +
> +/* Check if capability exists, and populate defaults */
> +static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
> + u32 fan_dev)
> +{
> + int err;
> +
> + *available = false;
> +
> + err = fan_curve_get_factory_default(asus, fan_dev);
> + if (err) {
> + if (err == -ENODEV)
> + return 0;
> + return err;
> + }
> +
> + *available = true;
> + return 0;
> +}
> +
> +/* Determine which fan the attribute is for if SENSOR_ATTR */
> +static struct fan_curve_data *fan_curve_attr_select(struct asus_wmi *asus,
> + struct device_attribute *attr)
> +{
> + int index = to_sensor_dev_attr(attr)->index;
> +
> + return &asus->custom_fan_curves[index & FAN_CURVE_DEV_GPU];
> +}
> +
> +/* Determine which fan the attribute is for if SENSOR_ATTR_2 */
> +static struct fan_curve_data *fan_curve_attr_2_select(struct asus_wmi *asus,
> + struct device_attribute *attr)
> +{
> + int nr = to_sensor_dev_attr_2(attr)->nr;
> +
> + return &asus->custom_fan_curves[nr & FAN_CURVE_DEV_GPU];
> +}
> +
> +static ssize_t fan_curve_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr);
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + struct fan_curve_data *data;
> + int value, index, nr;
> +
> + data = fan_curve_attr_2_select(asus, attr);
> + index = dev_attr->index;
> + nr = dev_attr->nr;
> +
> + if (nr & FAN_CURVE_PWM_MASK)
> + value = data->percents[index];
> + else
> + value = data->temps[index];
> +
> + return sysfs_emit(buf, "%d\n", value);
> +}
> +
> +/*
> + * "fan_dev" is the related WMI method such as ASUS_WMI_DEVID_CPU_FAN_CURVE.
> + */
> +static int fan_curve_write(struct asus_wmi *asus,
> + struct fan_curve_data *data)
> +{
> + u32 arg1 = 0, arg2 = 0, arg3 = 0, arg4 = 0;
> + u8 *percents = data->percents;
> + u8 *temps = data->temps;
> + int ret, i, shift = 0;
> +
> + if (!data->enabled)
> + return 0;
> +
> + for (i = 0; i < FAN_CURVE_POINTS / 2; i++) {
> + arg1 += (temps[i]) << shift;
> + arg2 += (temps[i + 4]) << shift;
> + /* Scale to percentage for device */
> + arg3 += (100 * percents[i] / 255) << shift;
> + arg4 += (100 * percents[i + 4] / 255) << shift;
> + shift += 8;
> + }
> +
> + return asus_wmi_evaluate_method5(ASUS_WMI_METHODID_DEVS,
> + data->device_id,
> + arg1, arg2, arg3, arg4, &ret);
> +}
> +
> +static ssize_t fan_curve_store(struct device *dev,
> + struct device_attribute *attr, const char *buf,
> + size_t count)
> +{
> + struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr);
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + struct fan_curve_data *data;
> + u8 value;
> + int err;
> +
> + int pwm = dev_attr->nr & FAN_CURVE_PWM_MASK;
> + int index = dev_attr->index;
> +
> + data = fan_curve_attr_2_select(asus, attr);
> +
> + err = kstrtou8(buf, 10, &value);
> + if (err < 0)
> + return err;
> +
> + if (pwm) {
> + data->percents[index] = value;
> + } else {
> + data->temps[index] = value;
> + }
> +
> + /*
> + * Mark as disabled so the user has to explicitly enable to apply a
> + * changed fan curve. This prevents potential lockups from writing out
> + * many changes as one-write-per-change.
> + */
> + data->enabled = false;
> +
> + return count;
> +}
> +
> +static ssize_t fan_curve_enable_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + struct fan_curve_data *data;
> + int out = 2;
> +
> + data = fan_curve_attr_select(asus, attr);
> +
> + if (data->enabled)
> + out = 1;
> +
> + return sysfs_emit(buf, "%d\n", out);
> +}
> +
> +static ssize_t fan_curve_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + struct fan_curve_data *data;
> + int value, err;
> +
> + data = fan_curve_attr_select(asus, attr);
> +
> + err = kstrtoint(buf, 10, &value);
> + if (err < 0)
> + return err;
> +
> + switch (value) {
> + case 1:
> + data->enabled = true;
> + break;
> + case 2:
> + data->enabled = false;
> + break;
> + /*
> + * Auto + reset the fan curve data to defaults. Make it an explicit
> + * option so that users don't accidentally overwrite a set fan curve.
> + */
> + case 3:
> + err = fan_curve_get_factory_default(asus, data->device_id);
> + if (err)
> + return err;
> + data->enabled = false;
> + break;
> + default:
> + return -EINVAL;
> + };
> +
> + if (data->enabled) {
> + err = fan_curve_write(asus, data);
> + if (err)
> + return err;
> + } else {
> + /*
> + * For machines with throttle this is the only way to reset fans
> + * to default mode of operation (does not erase curve data).
> + */
> + if (asus->throttle_thermal_policy_available) {
> + err = throttle_thermal_policy_write(asus);
> + if (err)
> + return err;
> + /* Similar is true for laptops with this fan */
> + } else if (asus->fan_type == FAN_TYPE_SPEC83) {
> + err = asus_fan_set_auto(asus);
> + if (err)
> + return err;
> + } else {
> + /* Safeguard against fautly ACPI tables */
> + err = fan_curve_get_factory_default(asus, data->device_id);
> + if (err)
> + return err;
> + err = fan_curve_write(asus, data);
> + if (err)
> + return err;
> + }
> + }
> + return count;
> +}
> +
> +/* CPU */
> +static SENSOR_DEVICE_ATTR_RW(pwm1_enable, fan_curve_enable, FAN_CURVE_DEV_CPU);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 0);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 1);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 2);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 3);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 4);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 5);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 6);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_temp, fan_curve,
> + FAN_CURVE_DEV_CPU, 7);
> +
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point1_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 0);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point2_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 1);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point3_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 2);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point4_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 3);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point5_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 4);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point6_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 5);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point7_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 6);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm1_auto_point8_pwm, fan_curve,
> + FAN_CURVE_DEV_CPU | FAN_CURVE_PWM_MASK, 7);
> +
> +/* GPU */
> +static SENSOR_DEVICE_ATTR_RW(pwm2_enable, fan_curve_enable, FAN_CURVE_DEV_GPU);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 0);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 1);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 2);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 3);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 4);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 5);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 6);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_temp, fan_curve,
> + FAN_CURVE_DEV_GPU, 7);
> +
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point1_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 0);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point2_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 1);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point3_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 2);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point4_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 3);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point5_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 4);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point6_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 5);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point7_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 6);
> +static SENSOR_DEVICE_ATTR_2_RW(pwm2_auto_point8_pwm, fan_curve,
> + FAN_CURVE_DEV_GPU | FAN_CURVE_PWM_MASK, 7);
> +
> +static struct attribute *asus_fan_curve_attr[] = {
> + /* CPU */
> + &sensor_dev_attr_pwm1_enable.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr,
> + /* GPU */
> + &sensor_dev_attr_pwm2_enable.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point4_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point5_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point6_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point7_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point8_temp.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point3_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point4_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point5_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point6_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point7_pwm.dev_attr.attr,
> + &sensor_dev_attr_pwm2_auto_point8_pwm.dev_attr.attr,
> + NULL
> +};
> +
> +static umode_t asus_fan_curve_is_visible(struct kobject *kobj,
> + struct attribute *attr, int idx)
> +{
> + struct device *dev = container_of(kobj, struct device, kobj);
> + struct asus_wmi *asus = dev_get_drvdata(dev->parent);
> +
> + /*
> + * Check the char instead of casting attr as there are two attr types
> + * involved here (attr1 and attr2)
> + */
> + if (asus->cpu_fan_curve_available && attr->name[3] == '1')
> + return 0644;
> +
> + if (asus->gpu_fan_curve_available && attr->name[3] == '2')
> + return 0644;
> +
> + return 0;
> +}
> +
> +static const struct attribute_group asus_fan_curve_attr_group = {
> + .is_visible = asus_fan_curve_is_visible,
> + .attrs = asus_fan_curve_attr,
> +};
> +__ATTRIBUTE_GROUPS(asus_fan_curve_attr);
> +
> +/*
> + * Must be initialised after throttle_thermal_policy_check_present() as
> + * we check the status of throttle_thermal_policy_available during init.
> + */
> +static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus)
> +{
> + struct device *dev = &asus->platform_device->dev;
> + struct device *hwmon;
> + int err;
> +
> + err = fan_curve_check_present(asus, &asus->cpu_fan_curve_available,
> + ASUS_WMI_DEVID_CPU_FAN_CURVE);
> + if (err)
> + return err;
> +
> + err = fan_curve_check_present(asus, &asus->gpu_fan_curve_available,
> + ASUS_WMI_DEVID_GPU_FAN_CURVE);
> + if (err)
> + return err;
> +
> + if (!asus->cpu_fan_curve_available && !asus->gpu_fan_curve_available)
> + return 0;
> +
> + hwmon = devm_hwmon_device_register_with_groups(
> + dev, "asus_custom_fan_curve", asus, asus_fan_curve_attr_groups);
> +
> + if (IS_ERR(hwmon)) {
> + dev_err(dev,
> + "Could not register asus_custom_fan_curve device\n");
> + return PTR_ERR(hwmon);
> + }
> +
> + return 0;
> +}
> +
> /* Throttle thermal policy ****************************************************/
>
> static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
> @@ -2092,6 +2637,12 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
> return -EIO;
> }
>
> + /* Must set to disabled if mode is toggled */
> + if (asus->cpu_fan_curve_available)
> + asus->custom_fan_curves[FAN_CURVE_DEV_CPU].enabled = false;
> + if (asus->gpu_fan_curve_available)
> + asus->custom_fan_curves[FAN_CURVE_DEV_GPU].enabled = false;
> +
> return 0;
> }
>
> @@ -3035,6 +3586,10 @@ static int asus_wmi_add(struct platform_device *pdev)
> if (err)
> goto fail_hwmon;
>
> + err = asus_wmi_custom_fan_curve_init(asus);
> + if (err)
> + goto fail_custom_fan_curve;
> +
> err = asus_wmi_led_init(asus);
> if (err)
> goto fail_leds;
> @@ -3106,6 +3661,7 @@ static int asus_wmi_add(struct platform_device *pdev)
> asus_wmi_sysfs_exit(asus->platform_device);
> fail_sysfs:
> fail_throttle_thermal_policy:
> +fail_custom_fan_curve:
> fail_platform_profile_setup:
> if (asus->platform_profile_support)
> platform_profile_remove();
> @@ -3131,6 +3687,7 @@ static int asus_wmi_remove(struct platform_device *device)
> asus_wmi_debugfs_exit(asus);
> asus_wmi_sysfs_exit(asus->platform_device);
> asus_fan_set_auto(asus);
> + throttle_thermal_policy_set_default(asus);
> asus_wmi_battery_exit(asus);
>
> if (asus->platform_profile_support)
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index 17dc5cb6f3f2..a571b47ff362 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -77,6 +77,8 @@
> #define ASUS_WMI_DEVID_THERMAL_CTRL 0x00110011
> #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */
> #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013
> +#define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024
> +#define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025
>
> /* Power */
> #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012
>

\
 
 \ /
  Last update: 2021-11-08 15:46    [W:0.092 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site