lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] wcn36xx: populate band before determining rate on RX
From
Date
Benjamin Li <benl@squareup.com> wrote:

> status.band is used in determination of status.rate -- for 5GHz on legacy
> rates there is a linear shift between the BD descriptor's rate field and
> the wcn36xx driver's rate table (wcn_5ghz_rates).
>
> We have a special clause to populate status.band for hardware scan offload
> frames. However, this block occurs after status.rate is already populated.
> Correctly handle this dependency by moving the band block before the rate
> block.
>
> This patch addresses kernel warnings & missing scan results for 5GHz APs
> that send their beacons/probe responses at the higher four legacy rates
> (24-54 Mbps), when using hardware scan offload:
>
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
> Modules linked in: wcn36xx [...]
> CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.19.107-g73909fa #1
> Hardware name: Square, Inc. T2 (all variants) (DT)
> Call trace:
> dump_backtrace+0x0/0x148
> show_stack+0x14/0x1c
> dump_stack+0xb8/0xf0
> __warn+0x2ac/0x2d8
> warn_slowpath_null+0x44/0x54
> ieee80211_rx_napi+0x744/0x8d8
> ieee80211_tasklet_handler+0xa4/0xe0
> tasklet_action_common+0xe0/0x118
> tasklet_action+0x20/0x28
> __do_softirq+0x108/0x1ec
> irq_exit+0xd4/0xd8
> __handle_domain_irq+0x84/0xbc
> gic_handle_irq+0x4c/0xb8
> el1_irq+0xe8/0x190
> lpm_cpuidle_enter+0x220/0x260
> cpuidle_enter_state+0x114/0x1c0
> cpuidle_enter+0x34/0x48
> do_idle+0x150/0x268
> cpu_startup_entry+0x20/0x24
> rest_init+0xd4/0xe0
> start_kernel+0x398/0x430
> ---[ end trace ae28cb759352b403 ]---
>
> Fixes: 8a27ca394782 ("wcn36xx: Correct band/freq reporting on RX")
> Signed-off-by: Benjamin Li <benl@squareup.com>
> Tested-by: Loic Poulain <loic.poulain@linaro.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

c9c5608fafe4 wcn36xx: populate band before determining rate on RX
cfdf6b19e750 wcn36xx: fix RX BD rate mapping for 5GHz legacy rates

--
https://patchwork.kernel.org/project/linux-wireless/patch/20211104010548.1107405-2-benl@squareup.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2021-11-08 14:24    [W:0.066 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site