lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v0.8 2/6] mm, x86/uaccess: add userspace atomic helpers
On Thu, Nov 04, 2021 at 12:58:00PM -0700, Peter Oskolkov wrote:

> In addition to futexes needing to do atomic operations in the userspace,
> a second use case is now in the works (UMCG, see
> https://lore.kernel.org/all/20210917180323.278250-1-posk@google.com/),
> so a generic facility to perform these operations has been called for
> (see https://lore.kernel.org/all/87ilyk9xc0.ffs@tglx/).
>
> Add a set of generic helpers to perform 32/64-bit xchg and cmpxchg
> operations in the userspace. Also implement the required
> architecture-specific support on x86_64.
>
> Signed-off-by: Peter Oskolkov <posk@google.com>
> ---
> arch/x86/include/asm/uaccess_64.h | 93 +++++++++++
> include/linux/uaccess.h | 46 ++++++
> mm/maccess.c | 264 ++++++++++++++++++++++++++++++
> 3 files changed, 403 insertions(+)
>
> diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
> index 45697e04d771..41e2f96d3ec4 100644
> --- a/arch/x86/include/asm/uaccess_64.h
> +++ b/arch/x86/include/asm/uaccess_64.h
> @@ -79,4 +79,97 @@ __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size)
> kasan_check_write(dst, size);
> return __copy_user_flushcache(dst, src, size);
> }
> +
> +#define ARCH_HAS_ATOMIC_UACCESS_HELPERS 1
> +
> +static inline int __try_cmpxchg_user_32(u32 *uval, u32 __user *uaddr,
> + u32 oldval, u32 newval)
> +{
> + int ret = 0;
> +
> + asm volatile("\n"
> + "1:\t" LOCK_PREFIX "cmpxchgl %4, %2\n"
> + "2:\n"
> + "\t.section .fixup, \"ax\"\n"
> + "3:\tmov %3, %0\n"
> + "\tjmp 2b\n"
> + "\t.previous\n"
> + _ASM_EXTABLE_UA(1b, 3b)
> + : "+r" (ret), "=a" (oldval), "+m" (*uaddr)
> + : "i" (-EFAULT), "r" (newval), "1" (oldval)
> + : "memory"
> + );
> + *uval = oldval;
> + return ret;
> +}
> +
> +static inline int __try_cmpxchg_user_64(u64 *uval, u64 __user *uaddr,
> + u64 oldval, u64 newval)
> +{
> + int ret = 0;
> +
> + asm volatile("\n"
> + "1:\t" LOCK_PREFIX "cmpxchgq %4, %2\n"
> + "2:\n"
> + "\t.section .fixup, \"ax\"\n"
> + "3:\tmov %3, %0\n"
> + "\tjmp 2b\n"
> + "\t.previous\n"
> + _ASM_EXTABLE_UA(1b, 3b)
> + : "+r" (ret), "=a" (oldval), "+m" (*uaddr)
> + : "i" (-EFAULT), "r" (newval), "1" (oldval)
> + : "memory"
> + );
> + *uval = oldval;
> + return ret;
> +}
> +
> +static inline int __try_xchg_user_32(u32 *oval, u32 __user *uaddr, u32 newval)
> +{
> + u32 oldval = 0;
> + int ret = 0;
> +
> + asm volatile("\n"
> + "1:\txchgl %0, %2\n"
> + "2:\n"
> + "\t.section .fixup, \"ax\"\n"
> + "3:\tmov %3, %1\n"
> + "\tjmp 2b\n"
> + "\t.previous\n"
> + _ASM_EXTABLE_UA(1b, 3b)
> + : "=r" (oldval), "=r" (ret), "+m" (*uaddr)
> + : "i" (-EFAULT), "0" (newval), "1" (0)

"1"(0) can be omitted, that ret is initialized. And the initialization
of oldval not need.

> + );
> +
> + if (ret)
> + return ret;
> +
> + *oval = oldval;
> + return 0;
> +}
> +
> +static inline int __try_xchg_user_64(u64 *oval, u64 __user *uaddr, u64 newval)
> +{
> + u64 oldval = 0;
> + int ret = 0;
> +
> + asm volatile("\n"
> + "1:\txchgq %0, %2\n"
> + "2:\n"
> + "\t.section .fixup, \"ax\"\n"
> + "3:\tmov %3, %1\n"
> + "\tjmp 2b\n"
> + "\t.previous\n"
> + _ASM_EXTABLE_UA(1b, 3b)
> + : "=r" (oldval), "=r" (ret), "+m" (*uaddr)
> + : "i" (-EFAULT), "0" (newval), "1" (0)

Same of above.

> + );
> +
> + if (ret)
> + return ret;
> +
> + *oval = oldval;
> + return 0;
> +}
> +
> #endif /* _ASM_X86_UACCESS_64_H */
> diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
> index ac0394087f7d..dcb3ac093075 100644
> --- a/include/linux/uaccess.h
> +++ b/include/linux/uaccess.h
> @@ -408,4 +408,50 @@ void __noreturn usercopy_abort(const char *name, const char *detail,
> unsigned long len);
> #endif
>
> +#ifdef ARCH_HAS_ATOMIC_UACCESS_HELPERS
> +/**
> + * cmpxchg_user_[32|64][_nofault|]() - compare_exchange 32/64-bit values
> + * @uaddr: Destination address, in user space;
> + * @curr_val: Source address, in kernel space;
> + * @new_val: The value to write to the destination address.
> + *
> + * This is the standard cmpxchg: atomically: compare *@uaddr to *@curr_val;
> + * if the values match, write @new_val to @uaddr, return 0; if the values
> + * do not match, write *@uaddr to @curr_val, return -EAGAIN.
> + *
> + * The _nofault versions don't fault and can be used in
> + * atomic/preempt-disabled contexts.
> + *
> + * Return:
> + * 0 : OK/success;
> + * -EINVAL: @uaddr is not properly aligned ('may fault' versions only);
> + * -EFAULT: memory access error (including mis-aligned @uaddr in _nofault);

(including mis-aligned @uaddr in _fault)

> + * -EAGAIN: @old did not match.
> + */
> +int cmpxchg_user_32_nofault(u32 __user *uaddr, u32 *curr_val, u32 new_val);
> +int cmpxchg_user_64_nofault(u64 __user *uaddr, u64 *curr_val, u64 new_val);
> +int cmpxchg_user_32(u32 __user *uaddr, u32 *curr_val, u32 new_val);
> +int cmpxchg_user_64(u64 __user *uaddr, u64 *curr_val, u64 new_val);
> +
> +/**
> + * xchg_user_[32|64][_nofault|]() - exchange 32/64-bit values
> + * @uaddr: Destination address, in user space;
> + * @val: Source address, in kernel space.
> + *
> + * This is the standard atomic xchg: exchange values pointed to by @uaddr and @val.
> + *
> + * The _nofault versions don't fault and can be used in
> + * atomic/preempt-disabled contexts.
> + *
> + * Return:
> + * 0 : OK/success;
> + * -EINVAL: @uaddr is not properly aligned ('may fault' versions only);
> + * -EFAULT: memory access error (including mis-aligned @uaddr in _nofault).

(including mis-aligned @uaddr in _fault)

> + */
> +int xchg_user_32_nofault(u32 __user *uaddr, u32 *val);
> +int xchg_user_64_nofault(u64 __user *uaddr, u64 *val);
> +int xchg_user_32(u32 __user *uaddr, u32 *val);
> +int xchg_user_64(u64 __user *uaddr, u64 *val);
> +#endif /* ARCH_HAS_ATOMIC_UACCESS_HELPERS */
> +
> #endif /* __LINUX_UACCESS_H__ */
> diff --git a/mm/maccess.c b/mm/maccess.c
> index d3f1a1f0b1c1..620556b11550 100644
> --- a/mm/maccess.c
> +++ b/mm/maccess.c
> @@ -335,3 +335,267 @@ long strnlen_user_nofault(const void __user *unsafe_addr, long count)
>
> return ret;
> }
> +
> +#ifdef ARCH_HAS_ATOMIC_UACCESS_HELPERS
> +
> +static int fix_pagefault(unsigned long uaddr, bool write_fault, int bytes)
> +{
> + struct mm_struct *mm = current->mm;
> + int ret;
> +
> + mmap_read_lock(mm);
> + ret = fixup_user_fault(mm, uaddr, write_fault ? FAULT_FLAG_WRITE : 0,
> + NULL);
> + mmap_read_unlock(mm);
> +
> + return ret < 0 ? ret : 0;
> +}
> +
> +int cmpxchg_user_32_nofault(u32 __user *uaddr, u32 *curr_val, u32 new_val)
> +{
> + int ret = -EFAULT;
> + u32 __old = *curr_val;
> +
> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + if (!user_access_begin(uaddr, sizeof(*uaddr))) {
> + pagefault_enable();
> + return -EFAULT;
> + }
> + ret = __try_cmpxchg_user_32(curr_val, uaddr, __old, new_val);
> + user_access_end();
> +
> + if (!ret)
> + ret = *curr_val == __old ? 0 : -EAGAIN;
> +
> + pagefault_enable();

May this can be moved to be sibling to user_access_end() even do not
know much about this to me.

> + return ret;
> +}
> +
> +int cmpxchg_user_64_nofault(u64 __user *uaddr, u64 *curr_val, u64 new_val)
> +{
> + int ret = -EFAULT;
> + u64 __old = *curr_val;
> +
> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + if (!user_access_begin(uaddr, sizeof(*uaddr))) {
> + pagefault_enable();
> + return -EFAULT;
> + }
> + ret = __try_cmpxchg_user_64(curr_val, uaddr, __old, new_val);
> + user_access_end();
> +
> + if (!ret)
> + ret = *curr_val == __old ? 0 : -EAGAIN;
> +
> + pagefault_enable();

The same.

> + return ret;
> +}
> +
> +int cmpxchg_user_32(u32 __user *uaddr, u32 *curr_val, u32 new_val)
> +{
> + int ret = -EFAULT;
> + u32 __old = *curr_val;
> +
> + /* Validate proper alignment. */
> + if (unlikely(((unsigned long)uaddr % sizeof(*uaddr)) ||

See address. sizeof(*uaddr) --> sizeof(uaddr).
The size of address length.

> + ((unsigned long)curr_val % sizeof(*curr_val))))

Same. sizeof(*curr_val) --> sizeof(curr_val)

> + return -EINVAL;

This return should be -EFAULT accord to the comment above
if not wrong to me.

> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + while (true) {
> + ret = -EFAULT;
> + if (!user_access_begin(uaddr, sizeof(*uaddr)))
> + break;
> +
> + ret = __try_cmpxchg_user_32(curr_val, uaddr, __old, new_val);
> + user_access_end();
> +
> + if (!ret) {
> + ret = *curr_val == __old ? 0 : -EAGAIN;
> + break;
> + }
> +
> + if (fix_pagefault((unsigned long)uaddr, true, sizeof(*uaddr)) < 0)
> + break;
> + }
> +
> + pagefault_enable();
> + return ret;
> +}
> +
> +int cmpxchg_user_64(u64 __user *uaddr, u64 *curr_val, u64 new_val)
> +{
> + int ret = -EFAULT;
> + u64 __old = *curr_val;
> +
> + /* Validate proper alignment. */
> + if (unlikely(((unsigned long)uaddr % sizeof(*uaddr)) ||
> + ((unsigned long)curr_val % sizeof(*curr_val))))
> + return -EINVAL;

The same as above.. even the address size is equal to the value
size. Not use value size here.

> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + while (true) {
> + ret = -EFAULT;
> + if (!user_access_begin(uaddr, sizeof(*uaddr)))
> + break;
> +
> + ret = __try_cmpxchg_user_64(curr_val, uaddr, __old, new_val);
> + user_access_end();
> +
> + if (!ret) {
> + ret = *curr_val == __old ? 0 : -EAGAIN;
> + break;
> + }
> +
> + if (fix_pagefault((unsigned long)uaddr, true, sizeof(*uaddr)) < 0)
> + break;
> + }
> +
> + pagefault_enable();
> + return ret;
> +}
> +
> +/**
> + * xchg_user_[32|64][_nofault|]() - exchange 32/64-bit values
> + * @uaddr: Destination address, in user space;
> + * @val: Source address, in kernel space.
> + *
> + * This is the standard atomic xchg: exchange values pointed to by @uaddr and @val.
> + *
> + * The _nofault versions don't fault and can be used in
> + * atomic/preempt-disabled contexts.
> + *
> + * Return:
> + * 0 : OK/success;
> + * -EINVAL: @uaddr is not properly aligned ('may fault' versions only);
> + * -EFAULT: memory access error (including mis-aligned @uaddr in _nofault).
> + */
> +int xchg_user_32_nofault(u32 __user *uaddr, u32 *val)
> +{
> + int ret;
> +
> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + if (!user_access_begin(uaddr, sizeof(*uaddr))) {
> + pagefault_enable();
> + return -EFAULT;
> + }
> +
> + ret = __try_xchg_user_32(val, uaddr, *val);
> + user_access_end();
> +
> + pagefault_enable();
> +
> + return ret;
> +}
> +
> +int xchg_user_64_nofault(u64 __user *uaddr, u64 *val)
> +{
> + int ret;
> +
> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + if (!user_access_begin(uaddr, sizeof(*uaddr))) {
> + pagefault_enable();
> + return -EFAULT;
> + }
> +
> + ret = __try_xchg_user_64(val, uaddr, *val);
> + user_access_end();
> +
> + pagefault_enable();
> +
> + return ret;
> +}
> +
> +int xchg_user_32(u32 __user *uaddr, u32 *val)
> +{
> + int ret = -EFAULT;
> +
> + /* Validate proper alignment. */
> + if (unlikely(((unsigned long)uaddr % sizeof(*uaddr)) ||
> + ((unsigned long)val % sizeof(*val))))
> + return -EINVAL;

The same as above.

> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + while (true) {
> + ret = -EFAULT;
> + if (!user_access_begin(uaddr, sizeof(*uaddr)))
> + break;
> +
> + ret = __try_xchg_user_32(val, uaddr, *val);
> + user_access_end();
> +
> + if (!ret)
> + break;
> +
> + if (fix_pagefault((unsigned long)uaddr, true, sizeof(*uaddr)) < 0)
> + break;
> + }
> +
> + pagefault_enable();
> +
> + return ret;
> +}
> +
> +int xchg_user_64(u64 __user *uaddr, u64 *val)
> +{
> + int ret = -EFAULT;
> +
> + /* Validate proper alignment. */
> + if (unlikely(((unsigned long)uaddr % sizeof(*uaddr)) ||
> + ((unsigned long)val % sizeof(*val))))
> + return -EINVAL;

The same as above..

> + if (unlikely(!access_ok(uaddr, sizeof(*uaddr))))
> + return -EFAULT;
> +
> + pagefault_disable();
> +
> + while (true) {
> + ret = -EFAULT;
> + if (!user_access_begin(uaddr, sizeof(*uaddr)))
> + break;
> +
> + ret = __try_xchg_user_64(val, uaddr, *val);
> + user_access_end();
> +
> + if (!ret)
> + break;
> +
> + if (fix_pagefault((unsigned long)uaddr, true, sizeof(*uaddr)) < 0)
> + break;
> + }
> +
> + pagefault_enable();
> +
> + return ret;
> +}
> +#endif /* ARCH_HAS_ATOMIC_UACCESS_HELPERS */
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-11-09 05:18    [W:0.144 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site