lkml.org 
[lkml]   [2021]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.10 016/101] ath11k: Align bss_chan_info structure with firmware
Date
From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

[ Upstream commit feab5bb8f1d4621025dceae7eef62d5f92de34ac ]

pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed
at the beginning. This causes invalid values in survey dump. Hence, align
the structure with the firmware.

Note: The firmware releases follow this order since the feature was
implemented. Also, it is not changing across the branches including
QCA6390.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ritesh Singh <ritesi@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210720214922.118078-3-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/wmi.c | 1 +
drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index eca86225a3413..fca71e00123d9 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1333,6 +1333,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) |
FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
cmd->req_type = type;
+ cmd->pdev_id = ar->pdev->pdev_id;

ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"WMI bss chan info req type %d\n", type);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 5a32ba0eb4f57..c47adaab7918b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2935,6 +2935,7 @@ struct wmi_pdev_bss_chan_info_req_cmd {
u32 tlv_header;
/* ref wmi_bss_chan_info_req_type */
u32 req_type;
+ u32 pdev_id;
} __packed;

struct wmi_ap_ps_peer_cmd {
@@ -4028,7 +4029,6 @@ struct wmi_vdev_stopped_event {
} __packed;

struct wmi_pdev_bss_chan_info_event {
- u32 pdev_id;
u32 freq; /* Units in MHz */
u32 noise_floor; /* units are dBm */
/* rx clear - how often the channel was unused */
@@ -4046,6 +4046,7 @@ struct wmi_pdev_bss_chan_info_event {
/*rx_cycle cnt for my bss in 64bits format */
u32 rx_bss_cycle_count_low;
u32 rx_bss_cycle_count_high;
+ u32 pdev_id;
} __packed;

#define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0
--
2.33.0
\
 
 \ /
  Last update: 2021-11-09 02:09    [W:0.146 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site