lkml.org 
[lkml]   [2021]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/12] rtc: rx8025: set range
Date
Set the RTC range, it is a classic BCD RTC, with 00 being a leap
year. Let the core handle range checking.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-rx8025.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 6941e0518290..6002305efa2d 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -248,9 +248,6 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
u8 date[7];
int ret;

- if ((dt->tm_year < 100) || (dt->tm_year > 199))
- return -EINVAL;
-
/*
* Here the read-only bits are written as "0". I'm not sure if that
* is sound.
@@ -553,6 +550,8 @@ static int rx8025_probe(struct i2c_client *client,
return PTR_ERR(rx8025->rtc);

rx8025->rtc->ops = &rx8025_rtc_ops;
+ rx8025->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
+ rx8025->rtc->range_max = RTC_TIMESTAMP_END_2099;

if (client->irq > 0) {
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
--
2.31.1
\
 
 \ /
  Last update: 2021-11-07 23:56    [W:0.111 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site