lkml.org 
[lkml]   [2021]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 09/13] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
On Sat, Oct 30, 2021 at 08:28:09PM +0200, Hans de Goede wrote:
> Add a bq25890_set_otg_cfg() helper function, this is a preparation
> patch for adding regulator support.

The same notice here: if we enabling the boost mode to supply USB OTG
device, we should disable charging and vice versa. I don't remember if
enabling of OTG with CHG enabled really caused issues but I avoided this
in my Yoga Book work.

I made quick check — seems that charging can be enabled during of boost
operation, there are no visible side effects in registers and no
limitation in the datasheet, so your approach may be good.

>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/power/supply/bq25890_charger.c | 28 ++++++++++++++------------
> 1 file changed, 15 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
> index 163ca5d761aa..7504e30f1e4d 100644
> --- a/drivers/power/supply/bq25890_charger.c
> +++ b/drivers/power/supply/bq25890_charger.c
> @@ -773,6 +773,17 @@ static int bq25890_power_supply_init(struct bq25890_device *bq)
> return PTR_ERR_OR_ZERO(bq->charger);
> }
>
> +static int bq25890_set_otg_cfg(struct bq25890_device *bq, u8 val)
> +{
> + int ret;
> +
> + ret = bq25890_field_write(bq, F_OTG_CFG, val);
> + if (ret < 0)
> + dev_err(bq->dev, "Error switching to boost/charger mode: %d\n", ret);
> +
> + return ret;
> +}
> +
> static void bq25890_usb_work(struct work_struct *data)
> {
> int ret;
> @@ -782,25 +793,16 @@ static void bq25890_usb_work(struct work_struct *data)
> switch (bq->usb_event) {
> case USB_EVENT_ID:
> /* Enable boost mode */
> - ret = bq25890_field_write(bq, F_OTG_CFG, 1);
> - if (ret < 0)
> - goto error;
> + bq25890_set_otg_cfg(bq, 1);
> break;
>
> case USB_EVENT_NONE:
> /* Disable boost mode */
> - ret = bq25890_field_write(bq, F_OTG_CFG, 0);
> - if (ret < 0)
> - goto error;
> -
> - power_supply_changed(bq->charger);
> + ret = bq25890_set_otg_cfg(bq, 0);
> + if (ret == 0)
> + power_supply_changed(bq->charger);
> break;
> }
> -
> - return;
> -
> -error:
> - dev_err(bq->dev, "Error switching to boost/charger mode.\n");
> }
>
> static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
> --
> 2.31.1
>

--
Yauhen Kharuzhy

\
 
 \ /
  Last update: 2021-11-07 19:50    [W:0.150 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site