lkml.org 
[lkml]   [2021]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/21] media: atmel: atmel-isc-base: implement mbus_code support in enumfmt
Hi Eugen

On Fri, Nov 05, 2021 at 10:25:59AM +0100, Jacopo Mondi wrote:
> Hi Eugen,
>
> On Fri, Oct 22, 2021 at 10:52:37AM +0300, Eugen Hristev wrote:
> > If enumfmt is called with an mbus_code, the enumfmt handler should only
> > return the formats that are supported for this mbus_code.
> > To make it more easy to understand the formats, changed the report order
> > to report first the native formats, and after that the formats that the ISC
> > can convert to.
> >
> > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
>
> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
>

Too soon! Sorry...

> Thanks
> j
>
> > ---
> > drivers/media/platform/atmel/atmel-isc-base.c | 51 ++++++++++++++++---
> > 1 file changed, 43 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> > index 2dd2511c7be1..1f7fbe5e4d79 100644
> > --- a/drivers/media/platform/atmel/atmel-isc-base.c
> > +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> > @@ -499,21 +499,56 @@ static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
> > u32 index = f->index;
> > u32 i, supported_index;
> >
> > - if (index < isc->controller_formats_size) {
> > - f->pixelformat = isc->controller_formats[index].fourcc;
> > - return 0;
> > + supported_index = 0;
> > +
> > + for (i = 0; i < isc->formats_list_size; i++) {
> > + if (!isc->formats_list[i].sd_support)


> > + continue;
> > + /*
> > + * If specific mbus_code is requested, provide only
> > + * supported formats with this mbus code
> > + */
> > + if (f->mbus_code && f->mbus_code !=
> > + isc->formats_list[i].mbus_code)
> > + continue;
> > + if (supported_index == index) {
> > + f->pixelformat = isc->formats_list[i].fourcc;
> > + return 0;
> > + }
> > + supported_index++;
> > }
> >
> > - index -= isc->controller_formats_size;
> > + /*
> > + * If the sensor does not support this mbus_code whatsoever,
> > + * there is no reason to advertise any of our output formats
> > + */
> > + if (supported_index == 0)
> > + return -EINVAL;

Shouldn't you also return -EINVAL if index > supported_index ?

In that case, I'm not gettng what the rest of the function is for ?

> > +
> > + /*
> > + * If the sensor uses a format that is not raw, then we cannot
> > + * convert it to any of the formats that we usually can with a
> > + * RAW sensor. Thus, do not advertise them.
> > + */
> > + if (!isc->config.sd_format ||
> > + !ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code))
> > + return -EINVAL;
> >
> > + /*
> > + * Iterate again through the formats that we can convert to.
> > + * However, to avoid duplicates, skip the formats that
> > + * the sensor already supports directly
> > + */
> > + index -= supported_index;
> > supported_index = 0;
> >
> > - for (i = 0; i < isc->formats_list_size; i++) {
> > - if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) ||
> > - !isc->formats_list[i].sd_support)
> > + for (i = 0; i < isc->controller_formats_size; i++) {
> > + /* if this format is already supported by sensor, skip it */
> > + if (find_format_by_fourcc(isc, isc->controller_formats[i].fourcc))
> > continue;
> > if (supported_index == index) {
> > - f->pixelformat = isc->formats_list[i].fourcc;
> > + f->pixelformat =
> > + isc->controller_formats[i].fourcc;
> > return 0;
> > }
> > supported_index++;
> > --
> > 2.25.1
> >

\
 
 \ /
  Last update: 2021-11-05 10:51    [W:2.497 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site