lkml.org 
[lkml]   [2021]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo
Date
In order to use CMDQ commands on these two IPs, we need to declare
the appropriate mediatek,gce-client-reg for them.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index dee66e5f054c..2b7d331a4588 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1212,6 +1212,7 @@ ufoe@1401a000 {
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_UFOE>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
};

dsi0: dsi@1401b000 {
@@ -1316,6 +1317,7 @@ od@14023000 {
compatible = "mediatek,mt8173-disp-od";
reg = <0 0x14023000 0 0x1000>;
clocks = <&mmsys CLK_MM_DISP_OD>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
};

hdmi0: hdmi@14025000 {
--
2.33.1
\
 
 \ /
  Last update: 2021-11-04 14:54    [W:0.067 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site