Messages in this thread | | | Subject | Re: [PATCH 10/10] ARM: dts: msm: Add TPDA and TPDM support to DTS for RB5 | From | Suzuki K Poulose <> | Date | Thu, 4 Nov 2021 09:45:08 +0000 |
| |
On 21/10/2021 08:38, Tao Zhang wrote: > Add TPDA and TPDM support to DTS for RB5 board. This change is a > sample for validating. After applying this patch, the new TPDM and > TPDA nodes can be observed at the coresight devices path. TPDM and > TPDA hardware can be operated by commands. > > List the commands for validating this series patches as below. > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm0.bin > echo 0 > /sys/bus/coresight/devices/tpdm0/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm1/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm1/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm1/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm1.bin > echo 0 > /sys/bus/coresight/devices/tpdm1/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink > echo 1 > /sys/bus/coresight/devices/tpdm2/enable_source > echo 1 > /sys/bus/coresight/devices/tpdm2/integration_test > echo 2 > /sys/bus/coresight/devices/tpdm2/integration_test > cat /dev/tmc_etf0 > /data/etf-tpdm2.bin > echo 0 > /sys/bus/coresight/devices/tpdm2/enable_source > echo 0 > /sys/bus/coresight/devices/tmc_etf0/enable_sink >
> If the data from TPDMs can be obtained from the ETF, it means > that the TPDMs verification is successful. At the same time,
How can we decode the TPDM trace ? Is there a public decoder available ?
> since TPDM0, TPDM1 and TPDM2 are all connected to the same > funnel "funnel@6c2d000" and output via different output ports, > it also means that the following patches verification is > successful. > coresight: add support to enable more coresight paths > coresight: funnel: add support for multiple output ports > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 439 +++++++++++++++++++++++ > 1 file changed, 439 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > index 8ac96f8e79d4..bcec8b181e11 100644 > --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts > @@ -222,6 +222,445 @@
> + > + funnel@6b04000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + arm,primecell-periphid = <0x000bb908>; > + > + reg = <0 0x6b04000 0 0x1000>; > + reg-names = "funnel-base"; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + out-ports { > + port { > + merge_funnel_out: endpoint { > + remote-endpoint = > + <&etf_in>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@7 { > + reg = <7>; > + swao_funnel_in7: endpoint {
> + slave-mode;
This is obsolete, with the new in-ports/out-ports construct.
Suzuki
| |