lkml.org 
[lkml]   [2021]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Question WRT early IRQ/NMI entry code
From
Date
On Tue, 2021-11-30 at 14:47 +0100, Thomas Gleixner wrote:
> On Tue, Nov 30 2021 at 12:28, Nicolas Saenz Julienne wrote:
> > while going over the IRQ/NMI entry code I've found a small 'inconsistency':
> > while in the IRQ entry path, we inform RCU of the context change *before*
> > incrementing the preempt counter, the opposite happens for the NMI entry
> > path. This applies to both arm64 and x86[1].
> >
> > Actually, rcu_nmi_enter() — which is also the main RCU context switch function
> > for the IRQ entry path — uses the preempt counter to verify it's not in NMI
> > context. So it would make sense to assume all callers have the same updated
> > view of the preempt count, which isn't true ATM.
> >
> > I'm sure there an obscure/non-obvious reason for this, right?
>
> There is.
>
> > IRQ path:
> > -> x86_64 asm (entry_64.S)
> > -> irqentry_enter() -> rcu_irq_enter() -> *rcu_nmi_enter()*
> > -> run_irq_on_irqstack_cond() -> irq_exit_rcu() -> *preempt_count_add(HARDIRQ_OFFSET)*
> > -> // Run IRQ...
> >
> > NMI path:
> > -> x86_64 asm (entry_64.S)
> > -> irqentry_nmi_enter() -> __nmi_enter() -> *__preempt_count_add(NMI_OFFSET + HARDIRQ_OFFSET)*
> > -> *rcu_nmi_enter()*
>
> The reason is symmetry vs. returning from interupt / exception:
>
> irqentry_enter()
> exit_rcu = false;
>
> if (user_mode(regs)) {
> irqentry_enter_from_user_mode(regs)
> __enter_from_user_mode(regs)
> user_exit_irqoff(); <- RCU handling for NOHZ full
>
> } else if (is_idle_task_current()) {
> rcu_irq_enter()
> exit_rcu = true;
> }
>
> irq_enter_rcu()
> __irq_enter_raw()
> preempt_count_add(HARDIRQ_OFFSET);
>
> irq_handler()
>
> irq_exit_rcu()
> preempt_count_sub(HARDIRQ_OFFSET);
> if (!in_interrupt() && local_softirq_pending())
> invoke_softirq();
>
> irqentry_exit(regs, exit_rcu)
>
> if (user_mode(regs)) {
> irqentry_exit_to_usermode(regs)
> user_enter_irqoff(); <- RCU handling for NOHZ full
> } else if (irqs_enabled(regs)) {
> if (exit_rcu) { <- Idle task special case
> rcu_irq_exit();
> } else {
> irqentry_exit_cond_resched();
> }
>
> } else if (exit_rcu) {
> rcu_irq_exit();
> }
>
> On return from interrupt HARDIRQ_OFFSET has to be removed _before_
> handling soft interrupts. It's also required that the preempt count has
> the original state _before_ reaching irqentry_exit() which
> might schedule if the interrupt/exception hit user space or kernel space
> with interrupts enabled.
>
> So doing it symmetric makes sense.
>
> For NMIs the above conditionals do not apply at all and we just do
>
> __nmi_enter()
> preempt_count_add(NMI_COUNT + HARDIRQ_COUNT);
> rcu_nmi_enter();
>
> handle_nmi();
>
> rcu_nmi_exit();
> __nmi_exit()
> preempt_count_sub(NMI_COUNT + HARDIRQ_COUNT);
>
> The reason why preempt count is incremented before invoking
> rcu_nmi_enter() is simply that RCU has to know about being in NMI
> context, i.e. in_nmi() has to return the correct answer.
>
> Thanks,

Thanks Thomas!

--
Nicolás Sáenz

\
 
 \ /
  Last update: 2021-11-30 16:26    [W:0.081 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site