lkml.org 
[lkml]   [2021]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] lontium-lt9611: check a different register bit for HDMI sensing
On Tue, 30 Nov 2021 at 06:30, Vinod Koul <vkoul@kernel.org> wrote:
>
> On 16-11-21, 18:07, Peter Collingbourne wrote:
> > It has been observed that with certain monitors such as the HP Z27n,
> > the register 0x825e reads a value of 0x79 when the HDMI cable is
> > connected and 0x78 when it is disconnected, i.e. bit 0 appears
> > to correspond to the HDMI connection status and bit 2 is never
> > set. Therefore, change the driver to check bit 0 instead of bit 2.
>
> So we have got limited information on this but BIT-2 seems to be related
> to HPD and empirical data from various monitors supports this, so this
> seems the right thing to do.
>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
>

Applied to drm-misc-next

\
 
 \ /
  Last update: 2021-11-30 13:18    [W:0.057 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site