lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 047/121] ARM: dts: bcm2711: Fix PCIe interrupts
Date
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 98481f3d72fb88cb5b973153434061015f094925 ]

The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.

The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.

Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm2711.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 398ecd7b9b68b..4ade854bdcdaf 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -480,11 +480,17 @@ pcie0: pcie@7d500000 {
#address-cells = <3>;
#interrupt-cells = <1>;
#size-cells = <2>;
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pcie", "msi";
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gicv2 GIC_SPI 144
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gicv2 GIC_SPI 145
+ IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gicv2 GIC_SPI 146
IRQ_TYPE_LEVEL_HIGH>;
msi-controller;
msi-parent = <&pcie0>;
--
2.33.0


\
 
 \ /
  Last update: 2021-11-29 19:40    [W:0.413 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site