lkml.org 
[lkml]   [2021]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 27/69] PCI: aardvark: Update comment about disabling link training
Date
From: Pali Rohár <pali@kernel.org>

commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.

According to PCI Express Base Specifications (rev 4.0, 6.6.1
"Conventional reset"), after fundamental reset a 100ms delay is needed
prior to enabling link training.

Update comment in code to reflect this requirement.

Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -236,7 +236,14 @@ static void advk_pcie_issue_perst(struct
if (!pcie->reset_gpio)
return;

- /* PERST does not work for some cards when link training is enabled */
+ /*
+ * As required by PCI Express spec (PCI Express Base Specification, REV.
+ * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay
+ * for at least 100ms after de-asserting PERST# signal is needed before
+ * link training is enabled. So ensure that link training is disabled
+ * prior de-asserting PERST# signal to fulfill that PCI Express spec
+ * requirement.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~LINK_TRAINING_EN;
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);

\
 
 \ /
  Last update: 2021-11-29 19:23    [W:0.257 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site