lkml.org 
[lkml]   [2021]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/4] media: hantro: Use syscon instead of 'ctrl' register
On Sun, Nov 28, 2021 at 6:47 PM Ezequiel Garcia
<ezequiel@vanguardiasur.com.ar> wrote:
>
> Hi Benjamin,
>
> On Thu, Nov 25, 2021 at 04:56:49PM +0100, Benjamin Gaignard wrote:
> > In order to be able to share the control hardware block between
> > VPUs use a syscon instead a ioremap it in the driver.
> > To keep the compatibility with older DT if 'nxp,imx8mq-vpu-ctrl'
> > phandle is not found look at 'ctrl' reg-name.
> > With the method it becomes useless to provide a list of register
> > names so remove it.
> >
> > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
> > Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> >
> > Please note that the only purpose of this commit is to allow to test
> > G2 hardware block for IMX8MQ until a proper solution isuing power domain
> > can be found. Do not merge it.
>
> It's been too many months waiting for the BLK-CTRL to be solved.
> Perhaps we can consider merging this approach instead.

If someone wants to send me an imx8mq board, I can attempt to work on
the blk-ctrl. I ported it to imx8mn, and I have sent an update for
imx8mm. I just don't have any imx8mq hardware.

adam
>
> Thanks,
> Ezequiel
>
> > ---
> > drivers/staging/media/hantro/hantro.h | 5 ++-
> > drivers/staging/media/hantro/imx8m_vpu_hw.c | 48 +++++++++++++--------
> > 2 files changed, 34 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
> > index 7da23f7f207a..616b5a6854cd 100644
> > --- a/drivers/staging/media/hantro/hantro.h
> > +++ b/drivers/staging/media/hantro/hantro.h
> > @@ -13,6 +13,7 @@
> > #define HANTRO_H_
> >
> > #include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > #include <linux/videodev2.h>
> > #include <linux/wait.h>
> > #include <linux/clk.h>
> > @@ -174,7 +175,7 @@ hantro_vdev_to_func(struct video_device *vdev)
> > * @reg_bases: Mapped addresses of VPU registers.
> > * @enc_base: Mapped address of VPU encoder register for convenience.
> > * @dec_base: Mapped address of VPU decoder register for convenience.
> > - * @ctrl_base: Mapped address of VPU control block.
> > + * @ctrl_base: Regmap of VPU control block.
> > * @vpu_mutex: Mutex to synchronize V4L2 calls.
> > * @irqlock: Spinlock to synchronize access to data structures
> > * shared with interrupt handlers.
> > @@ -193,7 +194,7 @@ struct hantro_dev {
> > void __iomem **reg_bases;
> > void __iomem *enc_base;
> > void __iomem *dec_base;
> > - void __iomem *ctrl_base;
> > + struct regmap *ctrl_base;
> >
> > struct mutex vpu_mutex; /* video_device lock */
> > spinlock_t irqlock;
> > diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > index 1a43f6fceef9..d7a63b41eb0e 100644
> > --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> > @@ -7,6 +7,7 @@
> >
> > #include <linux/clk.h>
> > #include <linux/delay.h>
> > +#include <linux/mfd/syscon.h>
> >
> > #include "hantro.h"
> > #include "hantro_jpeg.h"
> > @@ -25,30 +26,28 @@
> > #define CTRL_G1_PP_FUSE 0x0c
> > #define CTRL_G2_DEC_FUSE 0x10
> >
> > +static const struct regmap_config ctrl_regmap_ctrl = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 0x14,
> > +};
> > +
> > static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
> > {
> > - u32 val;
> > -
> > /* Assert */
> > - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> > - val &= ~reset_bits;
> > - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> > + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET, reset_bits, 0);
> >
> > udelay(2);
> >
> > /* Release */
> > - val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> > - val |= reset_bits;
> > - writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> > + regmap_update_bits(vpu->ctrl_base, CTRL_SOFT_RESET,
> > + reset_bits, reset_bits);
> > }
> >
> > static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
> > {
> > - u32 val;
> > -
> > - val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> > - val |= clock_bits;
> > - writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> > + regmap_update_bits(vpu->ctrl_base, CTRL_CLOCK_ENABLE,
> > + clock_bits, clock_bits);
> > }
> >
> > static int imx8mq_runtime_resume(struct hantro_dev *vpu)
> > @@ -65,9 +64,9 @@ static int imx8mq_runtime_resume(struct hantro_dev *vpu)
> > imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
> >
> > /* Set values of the fuse registers */
> > - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
> > - writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
> > - writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
> > + regmap_write(vpu->ctrl_base, CTRL_G1_DEC_FUSE, 0xffffffff);
> > + regmap_write(vpu->ctrl_base, CTRL_G1_PP_FUSE, 0xffffffff);
> > + regmap_write(vpu->ctrl_base, CTRL_G2_DEC_FUSE, 0xffffffff);
> >
> > clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
> >
> > @@ -211,7 +210,22 @@ static irqreturn_t imx8m_vpu_g2_irq(int irq, void *dev_id)
> >
> > static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
> > {
> > - vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
> > + struct device_node *np = vpu->dev->of_node;
> > +
> > + vpu->ctrl_base = syscon_regmap_lookup_by_phandle(np, "nxp,imx8m-vpu-ctrl");
> > + if (IS_ERR(vpu->ctrl_base)) {
> > + struct resource *res;
> > + void __iomem *ctrl;
> > +
> > + res = platform_get_resource_byname(vpu->pdev, IORESOURCE_MEM, "ctrl");
> > + ctrl = devm_ioremap_resource(vpu->dev, res);
> > + if (IS_ERR(ctrl))
> > + return PTR_ERR(ctrl);
> > +
> > + vpu->ctrl_base = devm_regmap_init_mmio(vpu->dev, ctrl, &ctrl_regmap_ctrl);
> > + if (IS_ERR(vpu->ctrl_base))
> > + return PTR_ERR(vpu->ctrl_base);
> > + }
> >
> > return 0;
> > }
> > --
> > 2.30.2
> >

\
 
 \ /
  Last update: 2021-11-29 02:26    [W:0.049 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site