lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 3/7] powercap/drivers/dtpm: Simplify the dtpm table
On Fri, Nov 26, 2021 at 9:43 AM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> On 26/11/2021 18:21, Rafael J. Wysocki wrote:
> > Hi Doug,
> >
> > On Fri, Nov 26, 2021 at 6:08 PM Doug Smythies <dsmythies@telus.net> wrote:
> >>
> >> Hi Daniel,
> >>
> >> This patch introduces a regression, at least on my test system.
> >> I can no longer change CPU frequency scaling drivers, for example
> >> from intel_cpufreq (A.K.A intel_pstate in passive mode) to intel_pstate
> >> (A.K.A. active mode). The task just hangs forever.
> >>
> >> I bisected the kernel and got this commit as the result.
> >> As a double check, I reverted this commit:
> >> 7a89d7eacf8e84f2afb94db5ae9d9f9faa93f01c
> >> on kernel 5.16-rc2 and the issue was resolved.
> >>
> >> While your email is fairly old, I observe that it was only included as of
> >> kernel 5.16-rc1.
> >>
> >> Command Example that never completes:
> >>
> >> $ echo passive | sudo tee /sys/devices/system/cpu/intel_pstate/status
> >>
> >> syslog excerpt attached.
> >
> > This looks like it may be problematic:
> >
> > diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c
> > index f6076de39540..98841524a782 100644
> > --- a/drivers/powercap/dtpm_cpu.c
> > +++ b/drivers/powercap/dtpm_cpu.c
> > @@ -204,7 +204,7 @@ static int cpuhp_dtpm_cpu_online(unsigned int cpu)
> > return ret;
> > }
> >
> > -int dtpm_register_cpu(struct dtpm *parent)
> > +static int __init dtpm_cpu_init(void)
> > {
> > int ret;
> >
> > so please try to remove the __init annotation from dtpm_cpu_init() and
> > see if that helps.
>
> Yes, actually that should be called only if it is configured properly.
> The dtpm_cpu just initializes itself unconditionally, I did not figured
> out there is the usually allyesconfig used by default by the distros.
>
> That should be fixed with a proper DT configuration [1]

I added your 5 patch set on top of 5.16-rc2 and confirm it fixes
the issue. I tested both ways, with CONFIG_OF not set, forcing the
CONFIG_DTPM stuff off, and with CONFIG_OF=y.

Oh, I used V2 of the patch set from earlier today.

... Doug

>
> [1]
> https://lore.kernel.org/all/20211124125506.2971069-3-daniel.lezcano@linaro.org/
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2021-11-26 22:59    [W:0.118 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site