lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: core: Avoid doing warm reset on disconnect event
On Fri, Nov 26, 2021 at 11:26:21AM +0800, Kai-Heng Feng wrote:
> Unplugging USB device may cause an incorrect warm reset loop:
> [ 143.039019] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x4202c0
> [ 143.039025] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling.
> [ 143.039051] hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0008
> [ 143.039058] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x4202c0, return 0x4102c0
> [ 143.039092] xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x4002c0
> [ 143.039096] usb usb2-port3: link state change
> [ 143.039099] xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
> [ 143.039101] usb usb2-port3: do warm reset
> [ 143.096736] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0
> [ 143.096751] usb usb2-port3: not warm reset yet, waiting 50ms
> [ 143.131500] xhci_hcd 0000:00:14.0: Can't queue urb, port error, link inactive
> [ 143.138260] xhci_hcd 0000:00:14.0: Port change event, 2-3, id 19, portsc: 0x2802a0
> [ 143.138263] xhci_hcd 0000:00:14.0: handle_port_status: starting usb2 port polling.
> [ 143.160756] xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2802a0, return 0x3002a0
> [ 143.160798] usb usb2-port3: not warm reset yet, waiting 200ms
>
> The warm reset is due to its PLS is in eSS.Inactive state. However, USB
> 3.2 spec table 10-13 mentions "Ports can be disabled by either a fault
> condition (disconnect event or other fault condition)", xHCI 1.2 spec
> table 5-27 also states that "This flag shall automatically be cleared to
> ‘0’ by a disconnect event or other fault condition." on PED.
>
> So use CSC = 0 and PED = 0 as indication that device is disconnecting to
> avoid doing warm reset.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/usb/core/hub.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 86658a81d2844..abd5a83d194b0 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -5530,6 +5530,7 @@ static void port_event(struct usb_hub *hub, int port1)
> __must_hold(&port_dev->status_lock)
> {
> int connect_change;
> + int disconnect = 0;

bool?

> struct usb_port *port_dev = hub->ports[port1 - 1];
> struct usb_device *udev = port_dev->child;
> struct usb_device *hdev = hub->hdev;
> @@ -5545,6 +5546,9 @@ static void port_event(struct usb_hub *hub, int port1)
> if (portchange & USB_PORT_STAT_C_CONNECTION) {
> usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
> connect_change = 1;
> + if (!(portstatus & USB_PORT_STAT_CONNECTION) &&
> + !(portstatus & USB_PORT_STAT_ENABLE))
> + disconnect = 1;
> }
>
> if (portchange & USB_PORT_STAT_C_ENABLE) {
> @@ -5613,7 +5617,7 @@ static void port_event(struct usb_hub *hub, int port1)
> * Warm reset a USB3 protocol port if it's in
> * SS.Inactive state.
> */
> - if (hub_port_warm_reset_required(hub, port1, portstatus)) {
> + if (hub_port_warm_reset_required(hub, port1, portstatus) && !disconnect) {

Why is this problem just showing up now? What commit caused this
regression?

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-11-26 07:56    [W:0.060 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site