lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 4/4] arm64: dts: renesas: r8a779a0: Provide default DSI data-lanes
Hi Kieran,

Thank you for the patch.

On Fri, Nov 26, 2021 at 09:54:45AM +0000, Kieran Bingham wrote:
> The data-lanes is a mandatory property for the endpoints.
> Provide a default when not connected that represents the maximum
> lanes supported by the device.
>
> A connected device should override the data-lanes if it uses a lower
> number of lanes.
>
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> ---
>
> This patch is split from 2/4 to keep it's change for distinct review.
> The data-lanes is marked as a mandatory property in the DSI bindings
> (which are out of tree, most recent posting at [0])
>
> [0] https://lore.kernel.org/all/YQGFP%2FcFoSksPyn+@pendragon.ideasonboard.com/
>
> The data-lanes property is marked as mandatory, which means it needs to
> be provided even when supplying the port templates which get overridden
> later. Is this expected behaviour?
>
> Does this have sufficient meaning? Or will it always have to be
> specified by any node overriding anyway...?

Isn't the remote-endpoint also mandatory ?

Given that there's no real good default value for data-lanes that is
significantly more likely than others, I'd prefer dropping the endpoints
from r8a779a0.dtsi and adding them in board files.

> arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> index fdad8bc4a069..7322c4628e2b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
> @@ -2661,6 +2661,7 @@ dsi0_in: endpoint {
> port@1 {
> reg = <1>;
> dsi0_out: endpoint {
> + data-lanes = <1 2 3 4>;
> };
> };
> };
> @@ -2691,7 +2692,9 @@ dsi1_in: endpoint {
>
> port@1 {
> reg = <1>;
> +
> dsi1_out: endpoint {
> + data-lanes = <1 2 3 4>;
> };
> };
> };

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-11-26 14:55    [W:0.218 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site