lkml.org 
[lkml]   [2021]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFCv2 6/8] HID: debug: Add USI usages
Date
From: Mika Westerberg <mika.westerberg@linux.intel.com>

Add USI defined usages to the HID debug code.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[tero.kristo: squashed in EV_MSC definitions]
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
---
drivers/hid/hid-debug.c | 40 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 7a92e2a04a09..cec0470e5485 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -141,8 +141,10 @@ static const struct hid_usage_entry hid_usage_table[] = {
{0, 0x33, "Touch"},
{0, 0x34, "UnTouch"},
{0, 0x35, "Tap"},
+ {0, 0x38, "Transducer Index"},
{0, 0x39, "TabletFunctionKey"},
{0, 0x3a, "ProgramChangeKey"},
+ {0, 0x3B, "Battery Strength"},
{0, 0x3c, "Invert"},
{0, 0x42, "TipSwitch"},
{0, 0x43, "SecondaryTipSwitch"},
@@ -160,7 +162,40 @@ static const struct hid_usage_entry hid_usage_table[] = {
{0, 0x59, "ButtonType"},
{0, 0x5A, "SecondaryBarrelSwitch"},
{0, 0x5B, "TransducerSerialNumber"},
+ {0, 0x5C, "Preferred Color"},
+ {0, 0x5D, "Preferred Color is Locked"},
+ {0, 0x5E, "Preferred Line Width"},
+ {0, 0x5F, "Preferred Line Width is Locked"},
{0, 0x6e, "TransducerSerialNumber2"},
+ {0, 0x70, "Preferred Line Style"},
+ {0, 0x71, "Preferred Line Style is Locked"},
+ {0, 0x72, "Ink"},
+ {0, 0x73, "Pencil"},
+ {0, 0x74, "Highlighter"},
+ {0, 0x75, "Chisel Marker"},
+ {0, 0x76, "Brush"},
+ {0, 0x77, "No Preference"},
+ {0, 0x80, "Digitizer Diagnostic"},
+ {0, 0x81, "Digitizer Error"},
+ {0, 0x82, "Err Normal Status"},
+ {0, 0x83, "Err Transducers Exceeded"},
+ {0, 0x84, "Err Full Trans Features Unavailable"},
+ {0, 0x85, "Err Charge Low"},
+ {0, 0x90, "Transducer Software Info"},
+ {0, 0x91, "Transducer Vendor Id"},
+ {0, 0x92, "Transducer Product Id"},
+ {0, 0x93, "Device Supported Protocols"},
+ {0, 0x94, "Transducer Supported Protocols"},
+ {0, 0x95, "No Protocol"},
+ {0, 0x96, "Wacom AES Protocol"},
+ {0, 0x97, "USI Protocol"},
+ {0, 0x98, "Microsoft Pen Protocol"},
+ {0, 0xA0, "Supported Report Rates"},
+ {0, 0xA1, "Report Rate"},
+ {0, 0xA2, "Transducer Connected"},
+ {0, 0xA3, "Switch Disabled"},
+ {0, 0xA4, "Switch Unimplemented"},
+ {0, 0xA5, "Transducer Switches"},
{ 15, 0, "PhysicalInterfaceDevice" },
{0, 0x00, "Undefined"},
{0, 0x01, "Physical_Interface_Device"},
@@ -990,7 +1025,10 @@ static const char *absolutes[ABS_CNT] = {

static const char *misc[MSC_MAX + 1] = {
[MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled",
- [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData"
+ [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData",
+ [MSC_PEN_ID] = "PenID", [MSC_PEN_COLOR] "PenColor",
+ [MSC_PEN_LINE_WIDTH] = "PenLineWidth",
+ [MSC_PEN_LINE_STYLE] = "PenLineStyle",
};

static const char *leds[LED_MAX + 1] = {
--
2.25.1
\
 
 \ /
  Last update: 2021-11-26 14:10    [W:0.099 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site