lkml.org 
[lkml]   [2021]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] spi: atmel: Remove setting of deprecated member of struct dma_slave_config
Date
The 'direction' member of 'struct dma_slave_config' is deprecated.
Instead, drivers should use the direction argument to the
device_prep_slave_sg and device_prep_dma_cyclic functions or the
dir field in the dma_interleaved_template structure.
spi-atmel uses the direction argument to dmaengine_prep_slave_sg.
slave_config.direction is not used in neither of the DMA controller
drivers (at_h/xdmac) that spi-atmel is using, we can just remove the
setting of slave_config.direction and live with whatever stack value
is there.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/spi/spi-atmel.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 22c7239aff75..f6626be4d4f7 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -467,7 +467,6 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as, u8 bits_per_word)
* So we'd rather write only one data at the time. Hence the transmit
* path works the same whether FIFOs are available (and enabled) or not.
*/
- slave_config.direction = DMA_MEM_TO_DEV;
if (dmaengine_slave_config(master->dma_tx, &slave_config)) {
dev_err(&as->pdev->dev,
"failed to configure tx dma channel\n");
@@ -482,7 +481,6 @@ static int atmel_spi_dma_slave_config(struct atmel_spi *as, u8 bits_per_word)
* So the receive path works the same whether FIFOs are available (and
* enabled) or not.
*/
- slave_config.direction = DMA_DEV_TO_MEM;
if (dmaengine_slave_config(master->dma_rx, &slave_config)) {
dev_err(&as->pdev->dev,
"failed to configure rx dma channel\n");
--
2.25.1
\
 
 \ /
  Last update: 2021-11-25 13:44    [W:0.038 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site