lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 018/323] ALSA: line6: fix control and interrupt message timeouts
Date
From: Johan Hovold <johan@kernel.org>

commit f4000b58b64344871d7b27c05e73932f137cfef6 upstream.

USB control and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025121142.6531-3-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/line6/driver.c | 14 +++++++-------
sound/usb/line6/driver.h | 2 +-
sound/usb/line6/podhd.c | 6 +++---
sound/usb/line6/toneport.c | 2 +-
4 files changed, 12 insertions(+), 12 deletions(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -117,12 +117,12 @@ static int line6_send_raw_message(struct
retval = usb_interrupt_msg(line6->usbdev,
usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ &partial, LINE6_TIMEOUT);
} else {
retval = usb_bulk_msg(line6->usbdev,
usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ &partial, LINE6_TIMEOUT);
}

if (retval) {
@@ -365,7 +365,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
(datalen << 8) | 0x21, address,
- NULL, 0, LINE6_TIMEOUT * HZ);
+ NULL, 0, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
@@ -380,7 +380,7 @@ int line6_read_data(struct usb_line6 *li
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000, len, 1,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);
if (ret < 0) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
@@ -408,7 +408,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x0013, 0x0000, data, datalen,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);

if (ret < 0)
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
@@ -440,7 +440,7 @@ int line6_write_data(struct usb_line6 *l
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x0022, address, data, datalen,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev,
@@ -456,7 +456,7 @@ int line6_write_data(struct usb_line6 *l
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000,
- status, 1, LINE6_TIMEOUT * HZ);
+ status, 1, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev,
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -31,7 +31,7 @@
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16

-#define LINE6_TIMEOUT 1
+#define LINE6_TIMEOUT 1000
#define LINE6_BUFSIZE_LISTEN 64
#define LINE6_MIDI_MESSAGE_MAXLEN 256

--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -236,7 +236,7 @@ static int podhd_dev_start(struct usb_li
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x11, 0,
- NULL, 0, LINE6_TIMEOUT * HZ);
+ NULL, 0, LINE6_TIMEOUT);
if (ret < 0) {
dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
goto exit;
@@ -246,7 +246,7 @@ static int podhd_dev_start(struct usb_li
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x11, 0x0,
- init_bytes, 3, LINE6_TIMEOUT * HZ);
+ init_bytes, 3, LINE6_TIMEOUT);
if (ret < 0) {
dev_err(pod->line6.ifcdev,
"receive length failed (error %d)\n", ret);
@@ -266,7 +266,7 @@ static int podhd_dev_start(struct usb_li
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
1, 0,
- NULL, 0, LINE6_TIMEOUT * HZ);
+ NULL, 0, LINE6_TIMEOUT);
exit:
kfree(init_bytes);
return ret;
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -130,7 +130,7 @@ static int toneport_send_cmd(struct usb_

ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
+ cmd1, cmd2, NULL, 0, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(&usbdev->dev, "send failed (error %d)\n", ret);

\
 
 \ /
  Last update: 2021-11-24 13:55    [W:0.774 / U:1.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site