lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 039/207] mwifiex: Read a PCI register after writing the TX ring write pointer
Date
From: Jonas Dreßler <verdre@v0yd.nl>

commit e5f4eb8223aa740237cd463246a7debcddf4eda1 upstream.

On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.

Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.

This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 8 ++++++++
1 file changed, 8 insertions(+)

--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -1265,6 +1265,14 @@ mwifiex_pcie_send_data(struct mwifiex_ad
ret = -1;
goto done_unmap;
}
+
+ /* The firmware (latest version 15.68.19.p21) of the 88W8897 PCIe+USB card
+ * seems to crash randomly after setting the TX ring write pointer when
+ * ASPM powersaving is enabled. A workaround seems to be keeping the bus
+ * busy by reading a random register afterwards.
+ */
+ mwifiex_read_reg(adapter, PCI_VENDOR_ID, &rx_val);
+
if ((mwifiex_pcie_txbd_not_full(card)) &&
tx_param->next_pkt_len) {
/* have more packets and TxBD still can hold more */

\
 
 \ /
  Last update: 2021-11-24 13:15    [W:0.558 / U:23.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site