lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.4 013/162] ALSA: line6: fix control and interrupt message timeouts
Date
From: Johan Hovold <johan@kernel.org>

commit f4000b58b64344871d7b27c05e73932f137cfef6 upstream.

USB control and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Fixes: 705ececd1c60 ("Staging: add line6 usb driver")
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025121142.6531-3-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/line6/driver.c | 12 ++++++------
sound/usb/line6/driver.h | 2 +-
sound/usb/line6/toneport.c | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -101,7 +101,7 @@ static int line6_send_raw_message(struct
usb_sndintpipe(line6->usbdev,
line6->properties->ep_ctrl_w),
(char *)frag_buf, frag_size,
- &partial, LINE6_TIMEOUT * HZ);
+ &partial, LINE6_TIMEOUT);

if (retval) {
dev_err(line6->ifcdev,
@@ -321,7 +321,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
(datalen << 8) | 0x21, address,
- NULL, 0, LINE6_TIMEOUT * HZ);
+ NULL, 0, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
@@ -336,7 +336,7 @@ int line6_read_data(struct usb_line6 *li
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000, len, 1,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);
if (ret < 0) {
dev_err(line6->ifcdev,
"receive length failed (error %d)\n", ret);
@@ -364,7 +364,7 @@ int line6_read_data(struct usb_line6 *li
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x0013, 0x0000, data, datalen,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);

if (ret < 0)
dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
@@ -396,7 +396,7 @@ int line6_write_data(struct usb_line6 *l
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x0022, address, data, datalen,
- LINE6_TIMEOUT * HZ);
+ LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev,
@@ -412,7 +412,7 @@ int line6_write_data(struct usb_line6 *l
USB_TYPE_VENDOR | USB_RECIP_DEVICE |
USB_DIR_IN,
0x0012, 0x0000,
- status, 1, LINE6_TIMEOUT * HZ);
+ status, 1, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(line6->ifcdev,
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -24,7 +24,7 @@
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16

-#define LINE6_TIMEOUT 1
+#define LINE6_TIMEOUT 1000
#define LINE6_BUFSIZE_LISTEN 32
#define LINE6_MESSAGE_MAXLEN 256

--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -133,7 +133,7 @@ static int toneport_send_cmd(struct usb_

ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
- cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ);
+ cmd1, cmd2, NULL, 0, LINE6_TIMEOUT);

if (ret < 0) {
dev_err(&usbdev->dev, "send failed (error %d)\n", ret);

\
 
 \ /
  Last update: 2021-11-24 13:00    [W:0.422 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site