Messages in this thread Patch in this message | | | From | cgel.zte@gmail ... | Subject | [PATCH] PM: AVS: Use div64_ul instead of do_div | Date | Thu, 25 Nov 2021 01:43:11 +0000 |
| |
From: Changcheng Deng <deng.changcheng@zte.com.cn>
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> --- drivers/soc/qcom/cpr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/cpr.c b/drivers/soc/qcom/cpr.c index 1d818a8ba208..e9b854ed1bdf 100644 --- a/drivers/soc/qcom/cpr.c +++ b/drivers/soc/qcom/cpr.c @@ -1010,7 +1010,7 @@ static int cpr_interpolate(const struct corner *corner, int step_volt, return corner->uV; temp = f_diff * (uV_high - uV_low); - do_div(temp, f_high - f_low); + temp = div64_ul(temp, f_high - f_low); /* * max_volt_scale has units of uV/MHz while freq values -- 2.25.1
| |