lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] mfd: da9063: Make vbcore registers volatile
From
Date
Hi Adam,

On 24. 11. 21 10:34, Adam Thomson wrote:
> On 24 November 2021 07:00, Andrej Picej wrote:
>
>> From: Stefan Riedmueller <s.riedmueller@phytec.de>
>>
>> The VBCORE1_A and VBCORE2_A registers are used to set the desired output
>> voltage of the BCORE 1 and 2 buck regulators. These values can be critical
>> if used as input for core voltages. Thus make them volatile so they do not
>> get cached.
>
> I don't understand the need for this change. What is this fixing? As I
> understand it the registers in question aren't volatile so should persist.

So basically this two patches were needed because we needed to enable
internal LDOs bypass mode on the imx6 and in the process this PMICs regs
needed to be somehow adjusted, which only worked if this regs were
marked as volatile. Long story short, this method was only introduced in
Phytec's version so upstreaming really doesn't make much sense.

I apologize for any inconvenience, but this two patches somehow slipped
through the process and landed on the "send-to-upstream" list. I also
talked with @Stefan Rieadmueller and he agreed that this two patches can
be dropped.

Thanks for your time.

>
>> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
>> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
>> ---
>> drivers/mfd/da9063-i2c.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
>> index 343ed6e96d87..8a3629c30382 100644
>> --- a/drivers/mfd/da9063-i2c.c
>> +++ b/drivers/mfd/da9063-i2c.c
>> @@ -161,6 +161,7 @@ static const struct regmap_range
>> da9063_ad_volatile_ranges[] = {
>> regmap_reg_range(DA9063_REG_ADC_RES_L,
>> DA9063_AD_REG_SECOND_D),
>> regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_SEQ),
>> regmap_reg_range(DA9063_REG_EN_32K, DA9063_REG_EN_32K),
>> + regmap_reg_range(DA9063_REG_VBCORE2_A,
>> DA9063_REG_VBCORE2_A),
>> regmap_reg_range(DA9063_AD_REG_MON_REG_5,
>> DA9063_AD_REG_MON_REG_6),
>> };
>>
>> @@ -206,6 +207,7 @@ static const struct regmap_range
>> da9063_bb_da_volatile_ranges[] = {
>> regmap_reg_range(DA9063_REG_ADC_RES_L,
>> DA9063_BB_REG_SECOND_D),
>> regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_SEQ),
>> regmap_reg_range(DA9063_REG_EN_32K, DA9063_REG_EN_32K),
>> + regmap_reg_range(DA9063_REG_VBCORE2_A,
>> DA9063_REG_VBCORE2_A),
>> regmap_reg_range(DA9063_BB_REG_MON_REG_5,
>> DA9063_BB_REG_MON_REG_6),
>> };
>>
>> --
>> 2.25.1
>

\
 
 \ /
  Last update: 2021-11-24 15:10    [W:0.052 / U:2.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site