lkml.org 
[lkml]   [2021]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 171/323] net: amd-xgbe: Toggle PLL settings during rate change
Date
From: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]

For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.

Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.

Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/amd/xgbe/xgbe-common.h | 8 ++++++++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++++++++++++++++++-
2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index b2cd3bdba9f89..533b8519ec352 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1331,6 +1331,10 @@
#define MDIO_VEND2_PMA_CDR_CONTROL 0x8056
#endif

+#ifndef MDIO_VEND2_PMA_MISC_CTRL0
+#define MDIO_VEND2_PMA_MISC_CTRL0 0x8090
+#endif
+
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
@@ -1389,6 +1393,10 @@
#define XGBE_PMA_RX_RST_0_RESET_ON 0x10
#define XGBE_PMA_RX_RST_0_RESET_OFF 0x00

+#define XGBE_PMA_PLL_CTRL_MASK BIT(15)
+#define XGBE_PMA_PLL_CTRL_ENABLE BIT(15)
+#define XGBE_PMA_PLL_CTRL_DISABLE 0x0000
+
/* Bit setting and getting macros
* The get macro will extract the current bit field value from within
* the variable
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 54753c8a6a9d7..714aead72c579 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1966,12 +1966,26 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
}
}

+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+ XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+ XGBE_PMA_PLL_CTRL_MASK,
+ enable ? XGBE_PMA_PLL_CTRL_ENABLE
+ : XGBE_PMA_PLL_CTRL_DISABLE);
+
+ /* Wait for command to complete */
+ usleep_range(100, 200);
+}
+
static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
unsigned int cmd, unsigned int sub_cmd)
{
unsigned int s0 = 0;
unsigned int wait;

+ /* Disable PLL re-initialization during FW command processing */
+ xgbe_phy_pll_ctrl(pdata, false);
+
/* Log if a previous command did not complete */
if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
netif_dbg(pdata, link, pdata->netdev,
@@ -1992,7 +2006,7 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
wait = XGBE_RATECHANGE_COUNT;
while (wait--) {
if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
- return;
+ goto reenable_pll;

usleep_range(1000, 2000);
}
@@ -2002,6 +2016,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,

/* Reset on error */
xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+ /* Enable PLL re-initialization */
+ xgbe_phy_pll_ctrl(pdata, true);
}

static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
--
2.33.0


\
 
 \ /
  Last update: 2021-11-24 14:06    [W:1.142 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site