lkml.org 
[lkml]   [2021]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2] tty: serial: imx: clear the RTSD status before enable the RTSD irq
Date
From: Fugang Duan <fugang.duan@nxp.com>

Clear RTSD status before enabling the irq event for RTSD in
imx_uart_enable_wakeup function.
Since RTSD can be set as the wakeup source, this can avoid any risk of
false triggering of a wake-up interrupts.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
changes in V2:
- change the subject and the commit message as suggested by Uwe.
---
drivers/tty/serial/imx.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 90f82e6c54e4..fb75e3e0d828 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2482,10 +2482,12 @@ static void imx_uart_enable_wakeup(struct imx_port *sport, bool on)

if (sport->have_rtscts) {
u32 ucr1 = imx_uart_readl(sport, UCR1);
- if (on)
+ if (on) {
+ imx_uart_writel(sport, USR1_RTSD, USR1);
ucr1 |= UCR1_RTSDEN;
- else
+ } else {
ucr1 &= ~UCR1_RTSDEN;
+ }
imx_uart_writel(sport, ucr1, UCR1);
}
}
--
2.17.1
\
 
 \ /
  Last update: 2021-11-23 11:50    [W:0.045 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site