lkml.org 
[lkml]   [2021]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: freescale: imx8mq: Disable noc dts node
On Thu, Nov 11, 2021 at 01:16:09PM +0200, Abel Vesa wrote:
> Adding interconnect properties to the consumer nodes creates
> a dependency on noc device. The imx-bus devfreq driver is not usable
> without the full interconnect support. The interconnect is not yet
> working on i.MX platforms. The devlink created on device_add makes
> the lcdif and other nodes that have the interconnect properties
> wait for the noc (imx-bus driver) to probe first.
>
> To make sure the interconnect consumers (nodes that have interconnect
> properties already added) will still probe, lets disable the noc node
> for now. Once the interconnect on i.MX platforms is fully functional,
> the status of the noc node can be changed.
>
> Fixes: ad1abc8a03fdbc05b ("arm64: dts: imx8mq: Add interconnect for lcdif")

Martin,

Do you have any comment? So your commit added something untested?

Shawn

> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 972766b67a15..f3182878f596 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1305,6 +1305,7 @@ noc: interconnect@32700000 {
> fsl,ddrc = <&ddrc>;
> #interconnect-cells = <1>;
> operating-points-v2 = <&noc_opp_table>;
> + status = "disabled";
>
> noc_opp_table: opp-table {
> compatible = "operating-points-v2";
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-11-23 10:02    [W:0.042 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site