lkml.org 
[lkml]   [2021]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] serial: 8250_pericom: Use serial_dl_write() instead of open coded
Date
It's better to stick with standard API to write and read DL value
when the hardware is compatible with it. In case any quirks are
needed it may be easily added in one place rather than modifying
code here and there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/tty/serial/8250/8250_pericom.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index f0d026325f17..025b055363c3 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -70,11 +70,11 @@ static void pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
/* Update delta due to possible divisor change */
delta = maxrate / divisor - baud;
if (abs(delta) < baud / 50) {
+ struct uart_8250_port *up = up_to_u8250p(port);
int lcr = serial_port_in(port, UART_LCR);

serial_port_out(port, UART_LCR, lcr | 0x80);
- serial_port_out(port, UART_DLL, divisor & 0xff);
- serial_port_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ serial_dl_write(up, divisor);
serial_port_out(port, 2, 16 - scr);
serial_port_out(port, UART_LCR, lcr);
return;
--
2.33.0
\
 
 \ /
  Last update: 2021-11-22 14:36    [W:0.097 / U:1.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site