lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: allwinner: h6: tanix-tx6: Add I2C node
Date
Tanix TX6 has a LED display driven by FD650.

Currently there is no Linux driver nor any binding for it. However, we
can at least provide I2C node in DT, so user space scripts or programs
can manually control it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 6c10ff7f4b1c..7c37aa4c60cb 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -32,6 +32,14 @@ hdmi_con_in: endpoint {
};
};

+ /* used for FD650 LED display driver */
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+ scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+ i2c-gpio,delay-us = <5>;
+ };
+
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
--
2.34.0
\
 
 \ /
  Last update: 2021-11-21 12:50    [W:0.034 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site