lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/2] pinctrl: qcom: Add egpio feature support
On Tue, Nov 16, 2021 at 6:38 AM Rajendra Nayak <rnayak@codeaurora.org> wrote:

> From: Prasad Sodagudi <psodagud@codeaurora.org>
>
> egpio is a scheme which allows special power Island Domain IOs
> (LPASS,SSC) to be reused as regular chip GPIOs by muxing regular
> TLMM functions with Island Domain functions.
> With this scheme, an IO can be controlled both by the cpu running
> linux and the Island processor. This provides great flexibility to
> re-purpose the Island IOs for regular TLMM usecases.
>
> 2 new bits are added to ctl_reg, egpio_present is a read only bit
> which shows if egpio feature is available or not on a given gpio.
> egpio_enable is the read/write bit and only effective if egpio_present
> is 1. Once its set, the Island IO is controlled from Chip TLMM.
> egpio_enable when set to 0 means the GPIO is used as Island Domain IO.
>
> To support this we add a new function 'egpio' which can be used to
> set the egpio_enable to 0, for any other TLMM controlled functions
> we set the egpio_enable to 1.
>
> Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>

This patch 1/2 does not have Bjorn's ACK but since he acked
patch 2 I just applied both anyway, Bjorn if you don't like this
just tell me and I pull them out again.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-11-22 00:29    [W:0.341 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site