lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC V2 5/5] arm64: dts: imx8mm-evk: Enable OV5640 Camera
Hi Tim,

On Fri, Nov 05, 2021 at 09:00:03AM -0700, Tim Harvey wrote:
> On Wed, Oct 27, 2021 at 6:34 PM Laurent Pinchart wrote:
> >
> > Hi Adam,
> >
> > Thank you for the patch.
> >
> > On Sat, Oct 23, 2021 at 03:34:56PM -0500, Adam Ford wrote:
> > > The schematic shows support for a camera interface, and the NXP
> > > kernel shows it is an OV5640.
> >
> > The camera is an external module though. Should this be a DT overlay ?
> >
>
> Laurent,
>
> I wanted to ask you about your comment here. I would agree that for
> something like the OV5640 on the imx8mm-evk which is an add-in board
> via a connector should be a dt overlay. I'm investigating using
> overlays for features like this on my boards vs creating hierarchical
> dts files and I see that the kernel allows building fragments with
> '/plugin/' but I don't see any such overlays in the kernel tree
> currently. Would overlay/fragments be accepted?

I believe so (otherwise I'm not sure why the build system would allow
compiling overlays). Rob may have a more authoritative opinion on this
topic.

> Are there any examples
> in the kernel tree already that I'm missing?

Commit 7a4c31ee877a ("arm64: zynqmp: Add support for Xilinx Kria SOM
board") has been added recently.

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-11-22 00:19    [W:1.202 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site