lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
Hi Adam,

On Mon, Nov 22, 2021 at 12:25:31AM +0200, Laurent Pinchart wrote:
> On Sat, Nov 06, 2021 at 10:54:23AM -0500, Adam Ford wrote:
> > Most of the blk-ctrl reset bits are found in one register, however
> > there are two bits in offset 8 for pulling the MIPI DPHY out of reset
> > and these need to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
> > out of reset or the MIPI_CSI hangs.
> >
> > Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> >
> > V2: Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL
> > Rename the new register to mipi_phy_rst_mask
> > Encapsulate the edits to this register with an if-statement
> >
> > drivers/soc/imx/imx8m-blk-ctrl.c | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> > index 519b3651d1d9..581eb4bc7f7d 100644
> > --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> > +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> > @@ -17,6 +17,7 @@
> >
> > #define BLK_SFT_RSTN 0x0
> > #define BLK_CLK_EN 0x4
> > +#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
> >
> > struct imx8m_blk_ctrl_domain;
> >
> > @@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
> > const char *gpc_name;
> > u32 rst_mask;
> > u32 clk_mask;
> > +
> > + /*
> > + * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
> > + * which is used to control the reset for the MIPI Phy.
> > + * Since it's only present in certain circumstances,
> > + * an if-statement should be used before setting and clearing this
> > + * register.
> > + */
> > + u32 mipi_phy_rst_mask;
> > };
> >
> > #define DOMAIN_MAX_CLKS 3
> > @@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> >
> > /* put devices into reset */
> > regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > + if (data->mipi_phy_rst_mask)
> > + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> >
> > /* enable upstream and blk-ctrl clocks to allow reset to propagate */
> > ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> > @@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
> >
> > /* release reset */
> > regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > + if (data->mipi_phy_rst_mask)
> > + regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> >
> > /* disable upstream clocks */
> > clk_bulk_disable_unprepare(data->num_clks, domain->clks);
> > @@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
> > struct imx8m_blk_ctrl *bc = domain->bc;
> >
> > /* put devices into reset and disable clocks */
> > + if (data->mipi_phy_rst_mask)
> > + regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> > +
>
> Is it the best option to enable/disable both the master and slave MIPI
> DPHY, regardless of whether they're used or not ? Or would it be better
> to implement a reset controller to expose the two resets independently,
> and acquire them from the corresponding display and camera drivers ?

And I've now seen this has been raised by Jagan. I'll reply to that
e-mail.

> > regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> > regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
> >
> > @@ -488,6 +505,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
> > .gpc_name = "mipi-csi",
> > .rst_mask = BIT(3) | BIT(4),
> > .clk_mask = BIT(10) | BIT(11),
> > + .mipi_phy_rst_mask = BIT(16) | BIT(17),
> > },
> > };
> >

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2021-11-21 23:31    [W:1.026 / U:1.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site