Messages in this thread | | | Date | Sun, 21 Nov 2021 19:58:31 +0000 | From | Marc Zyngier <> | Subject | Re: Kernel 5.15 doesn't detect SATA drive on boot |
| |
On Sun, 21 Nov 2021 15:41:18 +0000, Maxym Synytsky <synytsky@dedrozeba.org.ua> wrote: > > Hi. > I am also experiencing this issue on Gigabyte GA-M720-US3 mobo which uses > NVIDIA nForce 720D chipset. As I understand from the quirks patch it does not > fix my controller?
Are you sure? The dmesg you attached to this email shows otherwise:
[ 0.766490] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.766634] ata1.00: ATA-10: KINGSTON SA400S37120G, 03150002, max UDMA/133 [ 0.766641] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32) [ 0.769825] ata6: SATA link down (SStatus 0 SControl 300) [ 0.769845] ata2: SATA link down (SStatus 0 SControl 300) [ 0.769865] ata5: SATA link down (SStatus 0 SControl 300) [ 0.769876] ata3: SATA link down (SStatus 0 SControl 300) [ 0.769894] ata4: SATA link down (SStatus 0 SControl 300) [ 0.772046] ata1.00: configured for UDMA/133 [ 0.772218] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 0002 PQ: 0 ANSI: 5 [ 0.772503] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 0.772520] sd 0:0:0:0: [sda] Write Protect is off [ 0.772523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.772538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.773190] sda: sda1 sda2 [ 0.789894] sd 0:0:0:0: [sda] Attached SCSI disk
From the above, I can only conclude that your SATA controller is up and running.
Thanks,
M.
-- Without deviation from the norm, progress is not possible.
| |