lkml.org 
[lkml]   [2021]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V3 0/9] arm64: imx8mn: Enable more imx8m Nano functions
On Sun, Nov 21, 2021 at 8:21 AM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Adam,
>
> On Sun, Nov 21, 2021 at 11:17 AM Adam Ford <aford173@gmail.com> wrote:
>
> > I am using https://source.codeaurora.org/external/imx/imx-atf/log/?h=lf_v2.4
> >
> > Since the driver sending SMCC commands to ATF isn't doing that, I
> > assume it's safe to use the linux power-domain drivers with the ATF
> > from NXP's kernel.
> >
> > If you can point me to the repo you think I should be using, I'll give it a try.
>
> Do you know if the mainline TF-A repo v2.5 works too?
> https://github.com/ARM-software/arm-trusted-firmware/tree/v2.5

That's good to know.

I just built it into U-Boot:

NOTICE: BL31: v2.5(release):v2.5
NOTICE: BL31: Built : 08:24:13, Nov 21 2021

The Etnaviv driver is still loading without hanging

root@beacon-imx8mn-kit:~# dmesg |grep -i etna
[ 12.393936] etnaviv etnaviv: bound 38000000.gpu (ops gpu_ops [etnaviv])
[ 12.400676] etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203
[ 12.641297] [drm] Initialized etnaviv 1.3.0 20151214 for etnaviv on minor 0



>
> Thanks

\
 
 \ /
  Last update: 2021-11-21 15:35    [W:0.086 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site