lkml.org 
[lkml]   [2021]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/8] Improve support for Xiaomi Redmi Note 7
Date
This series expand the Redmi Note 7 device port to support:
+ Regulators
+ Volume keys
+ eMMC and SD card slot
+ Framebuffer display
+ USB

Changes in v2:
- Dropped linux,input-type from volume up as 1 is set by default.
- Dropped gpio-key,wakeup as it's a legacy property name and is
not relevant for a volume button.
- Rename label cont_splash_mem to framebuffer_mem and change node
name to memory.

Changes in v3:
- Add voltage range for vph_pwr
- Move RESIN to PM660 and make PON keys disabled by default
- Addressed review comments from Konrad
- Make Alexey Min the author of the USB patch as he came up with
the patch first on downstream.

Changes in v4:
- Dropped gpio.h from device tree as it's defined in sdm630.dtsi

Alexey Min (1):
arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB

Dang Huynh (7):
arm64: dts: qcom: sdm630: Assign numbers to eMMC and SD
arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsi
arm64: dts: qcom: sdm660-xiaomi-lavender: Add RPM and fixed regulators
arm64: dts: qcom: sdm660-xiaomi-lavender: Add PWRKEY and RESIN
arm64: dts: qcom: sdm660-xiaomi-lavender: Add volume up button
arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD
arm64: dts: qcom: sdm660-xiaomi-lavender: Enable Simple Framebuffer

arch/arm64/boot/dts/qcom/pm660.dtsi | 12 +-
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 16 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 5 +
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 352 ++++++++++++++++++
4 files changed, 376 insertions(+), 9 deletions(-)

--
2.33.1

\
 
 \ /
  Last update: 2021-11-20 22:43    [W:0.067 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site