lkml.org 
[lkml]   [2021]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 12/12] watchdog: s3c2410: Add Exynos850 support
From
Date
On 11/7/21 12:29 PM, Sam Protsenko wrote:
> Exynos850 is a bit different from SoCs already supported in WDT driver:
> - AUTOMATIC_WDT_RESET_DISABLE register is removed, so its value is
> always 0; .disable_auto_reset callback is not set for that reason
> - MASK_WDT_RESET_REQUEST register is replaced with
> CLUSTERx_NONCPU_IN_EN register; instead of masking (disabling) WDT
> reset interrupt it's now enabled with the same value; .mask_reset
> callback is reused for that functionality though
> - To make WDT functional, WDT counter needs to be enabled in
> CLUSTERx_NONCPU_OUT register; it's done using .enable_counter
> callback
>
> Also Exynos850 has two CPU clusters, each has its own dedicated WDT
> instance. Different PMU registers and bits are used for each cluster. So
> driver data is now modified in probe, adding needed info depending on
> cluster index passed from device tree.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> Changes in v3:
> - Renamed "samsung,index" property to more descriptive
> "samsung,cluster-index"
> - Used pre-defined and completely set driver data for cluster0 and
> cluster1
>
> Changes in v2:
> - Used single compatible for Exynos850, populating missing driver data
> in probe
> - Added "index" property to specify CPU cluster index
>
> drivers/watchdog/s3c2410_wdt.c | 62 +++++++++++++++++++++++++++++++++-
> 1 file changed, 61 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 96aa5d9c6ed4..1456201f27de 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -56,6 +56,13 @@
> #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404
> #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
> #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c
> +#define EXYNOS850_CLUSTER0_NONCPU_OUT 0x1220
> +#define EXYNOS850_CLUSTER0_NONCPU_INT_EN 0x1244
> +#define EXYNOS850_CLUSTER1_NONCPU_OUT 0x1620
> +#define EXYNOS850_CLUSTER1_NONCPU_INT_EN 0x1644
> +
> +#define EXYNOS850_CLUSTER0_WDTRESET_BIT 24
> +#define EXYNOS850_CLUSTER1_WDTRESET_BIT 23
>
> /**
> * Quirk flags for different Samsung watchdog IP-cores.
> @@ -205,6 +212,30 @@ static const struct s3c2410_wdt_variant drv_data_exynos7 = {
> QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE,
> };
>
> +static const struct s3c2410_wdt_variant drv_data_exynos850_cl0 = {
> + .mask_reset_reg = EXYNOS850_CLUSTER0_NONCPU_INT_EN,
> + .mask_bit = 2,
> + .mask_reset_inv = true,
> + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
> + .rst_stat_bit = EXYNOS850_CLUSTER0_WDTRESET_BIT,
> + .cnt_en_reg = EXYNOS850_CLUSTER0_NONCPU_OUT,
> + .cnt_en_bit = 7,
> + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \
> + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
> +};
> +
> +static const struct s3c2410_wdt_variant drv_data_exynos850_cl1 = {
> + .mask_reset_reg = EXYNOS850_CLUSTER1_NONCPU_INT_EN,
> + .mask_bit = 2,
> + .mask_reset_inv = true,
> + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
> + .rst_stat_bit = EXYNOS850_CLUSTER1_WDTRESET_BIT,
> + .cnt_en_reg = EXYNOS850_CLUSTER1_NONCPU_OUT,
> + .cnt_en_bit = 7,
> + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \
> + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN,
> +};
> +
> static const struct of_device_id s3c2410_wdt_match[] = {
> { .compatible = "samsung,s3c2410-wdt",
> .data = &drv_data_s3c2410 },
> @@ -216,6 +247,8 @@ static const struct of_device_id s3c2410_wdt_match[] = {
> .data = &drv_data_exynos5420 },
> { .compatible = "samsung,exynos7-wdt",
> .data = &drv_data_exynos7 },
> + { .compatible = "samsung,exynos850-wdt",
> + .data = &drv_data_exynos850_cl0 },
> {},
> };
> MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
> @@ -587,14 +620,38 @@ static inline const struct s3c2410_wdt_variant *
> s3c2410_get_wdt_drv_data(struct platform_device *pdev)
> {
> const struct s3c2410_wdt_variant *variant;
> + struct device *dev = &pdev->dev;
>
> - variant = of_device_get_match_data(&pdev->dev);
> + variant = of_device_get_match_data(dev);
> if (!variant) {
> /* Device matched by platform_device_id */
> variant = (struct s3c2410_wdt_variant *)
> platform_get_device_id(pdev)->driver_data;
> }
>
> + /* Choose Exynos850 driver data w.r.t. cluster index */
> + if (variant == &drv_data_exynos850_cl0) {

0-day has a point here. drv_data_exynos850_cl0 is declared inside a CONFIG_OF
conditional, causing compile failure if CONFIG_OF is not enabled.

Please fix and resubmit.

Guenter

\
 
 \ /
  Last update: 2021-11-20 21:31    [W:0.127 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site