lkml.org 
[lkml]   [2021]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 14/16] serial: 8250_dw: Add StarFive JH7100 quirk
On Tue, Nov 2, 2021 at 6:44 PM Emil Renner Berthing <kernel@esmil.dk> wrote:
>
> On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to
> exactly 16 * 115200Hz and many other common bitrates. Trying this will
> only result in a higher input clock, but low enough that the UART's
> internal divisor can't come close enough to the baud rate target.
> So rather than try to set the input clock it's better to skip the
> clk_set_rate call and rely solely on the UART's internal divisor.

Bingo!
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> ---
> drivers/tty/serial/8250/8250_dw.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 53f57c3b9f42..1769808031c5 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -414,6 +414,8 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>
> if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
> p->serial_out = dw8250_serial_out38x;
> + if (of_device_is_compatible(np, "starfive,jh7100-uart"))
> + p->set_termios = dw8250_do_set_termios;
>
> } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
> p->iotype = UPIO_MEM32;
> @@ -696,6 +698,7 @@ static const struct of_device_id dw8250_of_match[] = {
> { .compatible = "cavium,octeon-3860-uart" },
> { .compatible = "marvell,armada-38x-uart" },
> { .compatible = "renesas,rzn1-uart" },
> + { .compatible = "starfive,jh7100-uart" },
> { /* Sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, dw8250_of_match);
> --
> 2.33.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2021-11-02 21:15    [W:0.501 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site