lkml.org 
[lkml]   [2021]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] USB: array-index-out-of-bounds in ehci_brcm_hub_control
On Tue, Nov 02, 2021 at 03:44:46PM +0800, Haimin Zhang wrote:
> There isn't enough check parameter `wIndex` in the function
> `ehci_brcm_hub_control`;due to the size of array `port_status`
> is 15, so it may lead to out of bounds.
>
> Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
> Reported-by: TCS Robot <tcs_robot@tencent.com>
> ---
> drivers/usb/host/ehci-brcm.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
> index d3626bfa966b..4ca3eb9fcda9 100644
> --- a/drivers/usb/host/ehci-brcm.c
> +++ b/drivers/usb/host/ehci-brcm.c
> @@ -63,7 +63,8 @@ static int ehci_brcm_hub_control(
> unsigned long flags;
> int retval, irq_disabled = 0;
>
> - status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
> + if (wIndex && wIndex <= ports)
> + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];

This isn't quite right because it won't work properly if the upper byte
of wIndex is nonzero. You should do something like:

u32 temp;

temp = (wIndex & 0xff) - 1;
if (temp < ports)
status_reg = &ehci->regs->port_status[temp];

Alan Stern

\
 
 \ /
  Last update: 2021-11-02 16:27    [W:0.120 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site