lkml.org 
[lkml]   [2021]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add support for AD7293 Power Amplifier
Date
The AD7293 is a Power Amplifier drain current controller containing 
functionality for general-purpose monitoring and control of
current, voltage, and temperature, integrated into a single chip
solution with an SPI-compatible interface.

Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7293.pdf

This series of patches provide an initial implementation of the
driver with access from the userspace to the:
- ADC channels (read raw values, set range, set offset)
- DAC channels (set code, set offset)
- Temperature sensing (read raw values, set offset)
- Current sensing (read raw, set offset, set gain)

Antoniu Miclaus (2):
iio:amplifiers:ad7293: add support for AD7293
dt-bindings:iio:amplifiers: add ad7293 doc

.../bindings/iio/amplifiers/adi,ad7293.yaml | 49 ++
drivers/iio/amplifiers/Kconfig | 11 +
drivers/iio/amplifiers/Makefile | 1 +
drivers/iio/amplifiers/ad7293.c | 794 ++++++++++++++++++
4 files changed, 855 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
create mode 100644 drivers/iio/amplifiers/ad7293.c

--
2.33.1

\
 
 \ /
  Last update: 2021-11-02 15:00    [W:0.156 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site