lkml.org 
[lkml]   [2021]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] media: aspeed: fix mode-detect always timeout at 2nd run
Date
aspeed_video_get_resolution() will try to do res-detect again if the
timing got in last try is invalid. But it will always timeout because
VE_SEQ_CTRL_TRIG_MODE_DET only cleared after 1st mode-detect.

To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before set in
aspeed_video_enable_mode_detect().

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
drivers/media/platform/aspeed-video.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index cd2b71c81e31..b470f4b68aa0 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -611,6 +611,10 @@ static void aspeed_video_enable_mode_detect(struct aspeed_video *video)
aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
VE_INTERRUPT_MODE_DETECT);

+ /* Disable mode detect in order to re-trigger */
+ aspeed_video_update(video, VE_SEQ_CTRL,
+ VE_SEQ_CTRL_TRIG_MODE_DET, 0);
+
/* Trigger mode detect */
aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_TRIG_MODE_DET);
}
@@ -930,10 +934,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
return;
}

- /* Disable mode detect in order to re-trigger */
- aspeed_video_update(video, VE_SEQ_CTRL,
- VE_SEQ_CTRL_TRIG_MODE_DET, 0);
-
aspeed_video_check_and_set_polarity(video);

aspeed_video_enable_mode_detect(video);
--
2.25.1
\
 
 \ /
  Last update: 2021-11-02 08:14    [W:0.063 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site