Messages in this thread | | | Subject | Re: [PATCH v3 2/2] watchdog: Add Realtek Otto watchdog timer | From | Sander Vanheule <> | Date | Thu, 18 Nov 2021 18:15:41 +0100 |
| |
Hi Guenter,
On Wed, 2021-11-17 at 04:42 -0800, Guenter Roeck wrote: > On 11/16/21 11:13 PM, Sander Vanheule wrote: > > Hi Guenter, > > > > On Tue, 2021-11-16 at 21:20 -0800, Guenter Roeck wrote: > > > On Thu, Nov 04, 2021 at 10:32:13AM +0100, Sander Vanheule wrote: > > > > Realtek MIPS SoCs (platform name Otto) have a watchdog timer with > > > > pretimeout notifitication support. The WDT can (partially) hard reset, > > > > or soft reset the SoC. > > > > > > > > This driver implements all features as described in the devicetree > > > > binding, except the phase2 interrupt, and also functions as a restart > > > > handler. The cpu reset mode is considered to be a "warm" restart, since > > > > this mode does not reset all peripherals. Being an embedded system > > > > though, the "cpu" and "software" modes will still cause the bootloader > > > > to run on restart. > > > > > > > > It is not known how a forced system reset can be disabled on the > > > > supported platforms. This means that the phase2 interrupt will only fire > > > > at the same time as reset, so implementing phase2 is of little use. > > > > > > > > Signed-off-by: Sander Vanheule <sander@svanheule.net> > > > > > > Reviewed-by: Guenter Roeck <linux@roeck-us.net> > > > > Thank you for the review! In the meantime, I was preparing a v4 of this series with some > > small changes (see inline below). Could you let me know if I can keep your Reviewed-by > > with those changes? > > > > I think it would be better to re-review it.
I sent out the v4 a bit later than expected, because I hit a regression for the irqchip on this platform: https://lore.kernel.org/all/bbe5506a2458b2d6049bd22a5fda77ae6175ddec.camel@svanheule.net/
Best, Sander
| |