lkml.org 
[lkml]   [2021]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 20/25] PCI/PME: Use PCI_POSSIBLE_ERROR() to check read from hardware
Date
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use PCI_POSSIBLE_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Compile tested only.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
drivers/pci/pcie/pme.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 1d0dd77fed3a..ef8ce436ead9 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -224,7 +224,7 @@ static void pcie_pme_work_fn(struct work_struct *work)
break;

pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
- if (rtsta == (u32) ~0)
+ if (PCI_POSSIBLE_ERROR(rtsta))
break;

if (rtsta & PCI_EXP_RTSTA_PME) {
@@ -274,7 +274,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context)
spin_lock_irqsave(&data->lock, flags);
pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);

- if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
+ if (PCI_POSSIBLE_ERROR(rtsta) || !(rtsta & PCI_EXP_RTSTA_PME)) {
spin_unlock_irqrestore(&data->lock, flags);
return IRQ_NONE;
}
--
2.25.1
\
 
 \ /
  Last update: 2021-11-18 15:09    [W:0.165 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site