Messages in this thread | | | Subject | Re: [PATCH V3 1/4] regulator: dt-bindings: Add pm8008 regulator bindings | From | "Satya Priya Kakitapalli (Temp)" <> | Date | Thu, 18 Nov 2021 19:28:59 +0530 |
| |
On 10/29/2021 1:36 AM, Stephen Boyd wrote: > Quoting Satya Priya (2021-10-28 08:14:29) >> diff --git a/Documentation/devicetree/bindings/regulator/qcom,pm8008-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,pm8008-regulator.yaml >> new file mode 100644 >> index 0000000..cc624d1 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/regulator/qcom,pm8008-regulator.yaml >> @@ -0,0 +1,74 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/regulator/qcom,pm8008-regulator.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Technologies, Inc. PM8008 Regulator bindings >> + >> +maintainers: >> + - Satya Priya <skakit@codeaurora.org> >> + >> +description: >> + Qualcomm Technologies, Inc. PM8008 is an I2C controlled PMIC >> + containing 7 LDO regulators. >> + >> +properties: >> + compatible: >> + const: qcom,pm8008-regulator > Maybe qcom,pm8008-regulators because there's more than one? Okay >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 0 >> + >> + vdd_l1_l2-supply: >> + description: Input supply phandle of ldo1 and ldo2 regulators. >> + >> + vdd_l3_l4-supply: >> + description: Input supply phandle of ldo3 and ldo4 regulators. >> + >> + vdd_l5-supply: >> + description: Input supply phandle of ldo5 regulator. >> + >> + vdd_l6-supply: >> + description: Input supply phandle of ldo6 regulator. >> + >> + vdd_l7-supply: >> + description: Input supply phandle of ldo7 regulator. >> + >> +patternProperties: >> + "^l[1-7]@[0-9a-f]+$": >> + type: object >> + >> + $ref: "regulator.yaml#" >> + >> + description: PM8008 regulator peripherals of PM8008 regulator device >> + >> + properties: >> + reg: >> + maxItems: 1 >> + description: Base address of the regulator. >> + >> + regulator-name: true >> + >> + regulator-min-dropout-voltage-microvolt: > This needs to move to regulator.yaml in a separate patch. Okay >> + description: >> + Specifies the minimum voltage in microvolts that the parent >> + supply regulator must output, above the output of this >> + regulator. >> +
| |