Messages in this thread Patch in this message | | | From | Robert Foss <> | Subject | [PATCH v3 3/4] arm64: dts: qcom: apq8016-sbc: Remove clock-lanes property from &camss node | Date | Thu, 18 Nov 2021 13:48:18 +0100 |
| |
The clock-lanes property is no longer used as it is not programmable by the CSIPHY hardware block of Qcom ISPs and should be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index a5320d6d30e7..b7a578aafcbb 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -253,7 +253,6 @@ ports { port@0 { reg = <0>; csiphy0_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 2>; remote-endpoint = <&ov5640_ep>; status = "okay"; @@ -289,7 +288,6 @@ camera_rear@3b { port { ov5640_ep: endpoint { - clock-lanes = <1>; data-lanes = <0 2>; remote-endpoint = <&csiphy0_ep>; }; -- 2.32.0
| |