lkml.org 
[lkml]   [2021]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v5 06/10] ovl: implement overlayfs' ->write_inode operation
 ---- 在 星期四, 2021-11-18 19:23:15 Jan Kara <jack@suse.cz> 撰写 ----
> On Thu 18-11-21 14:32:36, Chengguang Xu wrote:
> >
> > ---- 在 星期三, 2021-11-17 14:11:29 Chengguang Xu <cgxu519@mykernel.net> 撰写 ----
> > > ---- 在 星期二, 2021-11-16 20:35:55 Miklos Szeredi <miklos@szeredi.hu> 撰写 ----
> > > > On Tue, 16 Nov 2021 at 03:20, Chengguang Xu <cgxu519@mykernel.net> wrote:
> > > > >
> > > > > ---- 在 星期四, 2021-10-07 21:34:19 Miklos Szeredi <miklos@szeredi.hu> 撰写 ----
> > > > > > On Thu, 7 Oct 2021 at 15:10, Chengguang Xu <cgxu519@mykernel.net> wrote:
> > > > > > > > However that wasn't what I was asking about. AFAICS ->write_inode()
> > > > > > > > won't start write back for dirty pages. Maybe I'm missing something,
> > > > > > > > but there it looks as if nothing will actually trigger writeback for
> > > > > > > > dirty pages in upper inode.
> > > > > > > >
> > > > > > >
> > > > > > > Actually, page writeback on upper inode will be triggered by overlayfs ->writepages and
> > > > > > > overlayfs' ->writepages will be called by vfs writeback function (i.e writeback_sb_inodes).
> > > > > >
> > > > > > Right.
> > > > > >
> > > > > > But wouldn't it be simpler to do this from ->write_inode()?
> > > > > >
> > > > > > I.e. call write_inode_now() as suggested by Jan.
> > > > > >
> > > > > > Also could just call mark_inode_dirty() on the overlay inode
> > > > > > regardless of the dirty flags on the upper inode since it shouldn't
> > > > > > matter and results in simpler logic.
> > > > > >
> > > > >
> > > > > Hi Miklos,
> > > > >
> > > > > Sorry for delayed response for this, I've been busy with another project.
> > > > >
> > > > > I agree with your suggesion above and further more how about just mark overlay inode dirty
> > > > > when it has upper inode? This approach will make marking dirtiness simple enough.
> > > >
> > > > Are you suggesting that all non-lower overlay inodes should always be dirty?
> > > >
> > > > The logic would be simple, no doubt, but there's the cost to walking
> > > > those overlay inodes which don't have a dirty upper inode, right?
> > >
> > > That's true.
> > >
> > > > Can you quantify this cost with a benchmark? Can be totally synthetic,
> > > > e.g. lookup a million upper files without modifying them, then call
> > > > syncfs.
> > > >
> > >
> > > No problem, I'll do some tests for the performance.
> > >
> >
> > Hi Miklos,
> >
> > I did some rough tests and the results like below. In practice, I don't
> > think that 1.3s extra time of syncfs will cause significant problem.
> > What do you think?
>
> Well, burning 1.3s worth of CPU time for doing nothing seems like quite a
> bit to me. I understand this is with 1000000 inodes but although that is
> quite a few it is not unheard of. If there would be several containers
> calling sync_fs(2) on the machine they could easily hog the machine... That
> is why I was originally against keeping overlay inodes always dirty and
> wanted their dirtiness to at least roughly track the real need to do
> writeback.
>

Hi Jan,

Actually, the time on user and sys are almost same with directly excute syncfs on underlying fs.
IMO, it only extends syncfs(2) waiting time for perticular container but not burning cpu.
What am I missing?


Thanks,
Chengguang


>
> > Test bed: kvm vm
> > 2.50GHz cpu 32core
> > 64GB mem
> > vm kernel 5.15.0-rc1+ (with ovl syncfs patch V6)
> >
> > one millon files spread to 2 level of dir hierarchy.
> > test step:
> > 1) create testfiles in ovl upper dir
> > 2) mount overlayfs
> > 3) excute ls -lR to lookup all file in overlay merge dir
> > 4) excute slabtop to make sure overlay inode number
> > 5) call syncfs to the file in merge dir
> >
> > Tested five times and the reusults are in 1.310s ~ 1.326s
> >
> > root@VM-144-4-centos test]# time ./syncfs ovl-merge/create-file.sh
> > syncfs success
> >
> > real 0m1.310s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-merge/create-file.sh
> > syncfs success
> >
> > real 0m1.326s
> > user 0m0.001s
> > sys 0m0.000s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-merge/create-file.sh
> > syncfs success
> >
> > real 0m1.321s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-merge/create-file.sh
> > syncfs success
> >
> > real 0m1.316s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-merge/create-file.sh
> > syncfs success
> >
> > real 0m1.314s
> > user 0m0.001s
> > sys 0m0.001s
> >
> >
> > Directly run syncfs to the file in ovl-upper dir.
> > Tested five times and the reusults are in 0.001s ~ 0.003s
> >
> > [root@VM-144-4-centos test]# time ./syncfs a
> > syncfs success
> >
> > real 0m0.002s
> > user 0m0.001s
> > sys 0m0.000s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-upper/create-file.sh
> > syncfs success
> >
> > real 0m0.003s
> > user 0m0.001s
> > sys 0m0.000s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-upper/create-file.sh
> > syncfs success
> >
> > real 0m0.001s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-upper/create-file.sh
> > syncfs success
> >
> > real 0m0.001s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-upper/create-file.sh
> > syncfs success
> >
> > real 0m0.001s
> > user 0m0.000s
> > sys 0m0.001s
> > [root@VM-144-4-centos test]# time ./syncfs ovl-upper/create-file.sh
> > syncfs success
> >
> > real 0m0.001s
> > user 0m0.000s
> > sys 0m0.001
> >
> >
> >
> >
> >
> >
> --
> Jan Kara <jack@suse.com>
> SUSE Labs, CR
>

\
 
 \ /
  Last update: 2021-11-18 13:03    [W:0.219 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site