lkml.org 
[lkml]   [2021]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 4/5] usb: dwc3: qcom: Change the IRQ flag for DP/DM hs phy irq
From
Date

On 11/1/2021 10:01 PM, Bjorn Andersson wrote:
> On Mon 01 Nov 00:53 PDT 2021, Sandeep Maheswaram wrote:
>
>> Change the IRQ flags for DP/DM hs phy irq to avoid interrupt
>> triggering during system suspend.
>>
> Why does replacing HIGH with RISING change this behavior, or do you get
> a RISING interrupt just before hitting suspend which you ignore?
>
> I think it would be nice to have the commit message for this (or per
> below request the DTS change) include some details about what's really
> happening on the irq line.

When we use IRQF_TRIGGER_HIGH we get interrupt during PM suspend and
causes resume.

[  119.743083] Resume caused by IRQ 101, qcom_dwc3 DP_HS

>> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
>> ---
>> drivers/usb/dwc3/dwc3-qcom.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
>> index 54461f1..356f4f8 100644
>> --- a/drivers/usb/dwc3/dwc3-qcom.c
>> +++ b/drivers/usb/dwc3/dwc3-qcom.c
>> @@ -473,7 +473,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>> irq_set_status_flags(irq, IRQ_NOAUTOEN);
>> ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>> qcom_dwc3_resume_irq,
>> - IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
>> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> IRQF_TRIGGER_* should be omitted from the driver and supplied by the DT.
>
> The dtbs out there should all have IRQ_TYPE_LEVEL_HIGH at this time, so
> simply dropping that from this list and updating the dts would be the
> right thing to do.
>
> Regards,
> Bjorn
Ok. Dropping IRQF_TRIGGER_*  solved the resume issue during PM suspend.
>> "qcom_dwc3 DP_HS", qcom);
>> if (ret) {
>> dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
>> @@ -488,7 +488,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
>> irq_set_status_flags(irq, IRQ_NOAUTOEN);
>> ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
>> qcom_dwc3_resume_irq,
>> - IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
>> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>> "qcom_dwc3 DM_HS", qcom);
>> if (ret) {
>> dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2021-11-18 12:46    [W:0.045 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site