lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] iommu/io-pgtable: Add DART subpage protection support
Date
DART allows to only expose a subpage to the device. While this is an
optional feature on the M1 DARTs the new ones present on the Pro/Max
models require this field in every PTE.

Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
drivers/iommu/io-pgtable-arm.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
index dd9e47189d0d..a8c660b8b3e9 100644
--- a/drivers/iommu/io-pgtable-arm.c
+++ b/drivers/iommu/io-pgtable-arm.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) "arm-lpae io-pgtable: " fmt

#include <linux/atomic.h>
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/io-pgtable.h>
#include <linux/kernel.h>
@@ -133,6 +134,9 @@
#define APPLE_DART_PTE_PROT_NO_WRITE (1<<7)
#define APPLE_DART_PTE_PROT_NO_READ (1<<8)

+#define APPLE_DART_PTE_SUBPAGE_START GENMASK_ULL(63, 52)
+#define APPLE_DART_PTE_SUBPAGE_END GENMASK_ULL(51, 40)
+
/* IOPTE accessors */
#define iopte_deref(pte,d) __va(iopte_to_paddr(pte, d))

@@ -273,6 +277,12 @@ static void __arm_lpae_init_pte(struct arm_lpae_io_pgtable *data,
else
pte |= ARM_LPAE_PTE_TYPE_BLOCK;

+ if (data->iop.fmt == APPLE_DART) {
+ /* subpage protection: always allow access to the entire page */
+ pte |= FIELD_PREP(APPLE_DART_PTE_SUBPAGE_START, 0);
+ pte |= FIELD_PREP(APPLE_DART_PTE_SUBPAGE_END, 0xfff);
+ }
+
for (i = 0; i < num_entries; i++)
ptep[i] = pte | paddr_to_iopte(paddr + i * sz, data);

--
2.25.1
\
 
 \ /
  Last update: 2021-11-17 22:20    [W:0.125 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site