[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCHv2] Bluetooth: quirk disabling LE Read Transmit Power
Hi Orlando,

>> So if this just affects two macs, why can't the fix be realized as a
>> quirk that is only enabled on those two systems? Or are they impossible
>> to detect clearly via DMI data or something like that?
> I think we should be able to quirk based off the acpi _CID "apple-uart-blth"
> or _HID "BCM2E7C". Marcel suggested quirking based of the acpi table here
> This would catch some unaffected Macs, but they don't support the LE Read
> Transmit Power command anyway (the affected macs were released after it
> was added to the Bluetooth spec, while the unaffected Macs were released
> before it was added to the spec, and thus don't support it).
> I'm not sure how to go about applying a quirk based off this, there are
> quirks in drivers/bluetooth/hci_bcm.c (no_early_set_baudrate and
> drive_rts_on_open), but they don't seem to be based off acpi ids.
> It might be simpler to make it ignore the Unknown Command error, like
> in this patch
> however that only applies on bluetooth-next and needed the status it
> checks for to be -56, not 0x01.

so we abstain from try-and-error sending of commands. The Bluetooth spec
has a list of supported commands that a host can query for a reason. This
is really broken behavior of the controller and needs to be pointed out as

The question is just how we quirk it.



 \ /
  Last update: 2021-11-17 20:03    [W:0.244 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site