lkml.org 
[lkml]   [2021]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo
From


On 04/11/2021 14:52, AngeloGioacchino Del Regno wrote:
> In order to use CMDQ commands on these two IPs, we need to declare
> the appropriate mediatek,gce-client-reg for them.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Now applied to v5.16-next/dts64 thanks!

> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index dee66e5f054c..2b7d331a4588 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -1212,6 +1212,7 @@ ufoe@1401a000 {
> interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_UFOE>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
> };
>
> dsi0: dsi@1401b000 {
> @@ -1316,6 +1317,7 @@ od@14023000 {
> compatible = "mediatek,mt8173-disp-od";
> reg = <0 0x14023000 0 0x1000>;
> clocks = <&mmsys CLK_MM_DISP_OD>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
> };
>
> hdmi0: hdmi@14025000 {
>

\
 
 \ /
  Last update: 2021-11-17 18:50    [W:0.036 / U:3.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site